timing with a 270 regrind cam
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
mike37 cdn
Topic author - Posts: 28
- Joined: Sun Jan 06, 2019 3:36 pm
- First Name: mike
- Last Name: mclean
- Location: pefferlaw ont ca
timing with a 270 regrind cam
re building my 26 engine bought a 270 regrind cam just wondering if I need to set the timing different than the stock at 15 dec atdc i put in new ss valves and adjustable lifters and running high compression pistons thanks mike
-
Mark Gregush
- Posts: 5370
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: timing with a 270 regrind cam
Same as any other T, just after top dead center. You are setting for the spark to happen just after to prevent kick back. After that setting to where it runs best.
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup