Anyone know what size the headlight adjustment screw is? Found out last night I don't have any.
Brad
Headlight Adjustment Screw
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Original Smith
- Posts: 3699
- Joined: Tue Jan 08, 2019 10:43 am
- First Name: Larry
- Last Name: Smith
- * REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
- Location: Lomita, California
- MTFCA Life Member: YES
Re: Headlight Adjustment Screw
10-32 X 1". Don Lang is selling them now, but when I did mine I had to drill the cotter pin hole. I used stainless, because it will never get dull. Don's have the cotter pin hole according to his catalog.
-
Jeepbone1
Topic author - Posts: 608
- Joined: Sun Jan 06, 2019 6:10 pm
- First Name: Brad
- Last Name: Kirtner
- * REQUIRED* Type and Year of Model Ts owned: 1924 Touring Car, 1927 Closed Cab TT, 1927 Coupe
- Location: Salem, Virginia
- Board Member Since: 2018
Re: Headlight Adjustment Screw
Thanks Larry!
Brad
Brad
-
George N Lake Ozark
- Posts: 324
- Joined: Sun Jan 06, 2019 2:15 pm
- First Name: George P
- Last Name: Clipner
- * REQUIRED* Type and Year of Model Ts owned: Late '26 Touring
- Location: LakeOzark,Missourah
Re: Headlight Adjustment Screw
I replaced mine from the hardware store , didn't have a good way to drill cotter holes at the time so I picked up four matching nuts and used one as a jam nut. still working.