ISO the 3-in-1 copper exhaust rings
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
TWrenn
Topic author - Posts: 3743
- Joined: Sun Jan 06, 2019 10:53 am
- First Name: Tim
- Last Name: Wrenn
- * REQUIRED* Type and Year of Model Ts owned: '13 Touring, '26 "Overlap" Fordor
- Location: Ohio
- Board Member Since: 2019
ISO the 3-in-1 copper exhaust rings
Does anyone still offer these so called 3 in 1 copper gasket rings? I know they used to be from Australia at one time? Seems vendors here don't handle them?
- Attachments
-
-
Dan McEachern
- Posts: 1402
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
-
Allan
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: ISO the 3-in-1 copper exhaust rings
Tim, you have me confused. The title of your post calls for 3 in one copper gaskets. The parts bag illustrated shows 6 pieces of individual copper rings. I have some three- holes -in -a -row copper gaskets you can have for the price of the postage. The set of 6 individual heavy copper gaskets are Australian made. You can get them directly from Fuel Tank and Radiator services in Queensland. i just received two sets from them. You can check them out on line.
Hope this helps.
Allan from down under.
Hope this helps.
Allan from down under.
-
TRDxB2
- Posts: 6262
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: ISO the 3-in-1 copper exhaust rings
Yup, the title & bag don't jive
- Attachments
-
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
TWrenn
Topic author - Posts: 3743
- Joined: Sun Jan 06, 2019 10:53 am
- First Name: Tim
- Last Name: Wrenn
- * REQUIRED* Type and Year of Model Ts owned: '13 Touring, '26 "Overlap" Fordor
- Location: Ohio
- Board Member Since: 2019
Re: ISO the 3-in-1 copper exhaust rings
Allan and Frank you are correct. My bad. Brain fart!! I need the 6 individual rings..not sure why I called them 3 in 1!! 
-
TWrenn
Topic author - Posts: 3743
- Joined: Sun Jan 06, 2019 10:53 am
- First Name: Tim
- Last Name: Wrenn
- * REQUIRED* Type and Year of Model Ts owned: '13 Touring, '26 "Overlap" Fordor
- Location: Ohio
- Board Member Since: 2019
Re: ISO the 3-in-1 copper exhaust rings
Thanks Dan!Dan McEachern wrote: ↑Sun Mar 03, 2024 6:43 pmI got some from Snyders a few months ago....
https://www.snydersantiqueauto.com/prod ... &cat=41892
I been busier than a one armed wallpaper hanger to check so went this route first! I'll call tomorrow.
-
BUSHMIKE
- Posts: 354
- Joined: Tue Nov 01, 2022 6:46 am
- First Name: Mike
- Last Name: Cushway
- * REQUIRED* Type and Year of Model Ts owned: 1925 TT, 1926 TT, 1926 TT
- Location: Trout Creek, MI
Re: ISO the 3-in-1 copper exhaust rings
Ill start by saying that I support our T vendors as much as possible. A year ago, when there was no stock available for these copper rings at ANY of our standard T vendors, I inquired directly to Australia. The pleasant phone call revealed “plenty” of these gaskets in stock. The gal on the other end suggested that If I buy (6) sets they would eat the international shipping. Price was less than half of cost here and I had them in a little over a week!