This may have been discuses before but I can't find it.
Getting ready to install Rocky Mountain Brakes on my 27 Touring but first I need to put on new linings, is there a certain procedure I should follow to do this, to me it looks like I just start at one end and finish on the other, centering the lining on the band.
Your help is greatly appreciated,
Bruce
How to install Rocky Mountain Brake linings
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
TRDxB2
- Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: How to install Rocky Mountain Brake linings
instructions for adding the brakes
instructions for the Brake Equalizer
--
--
discussions on the linings
viewtopic.php?t=9253
https://www.mtfca.com/discus/messages/1 ... 1279998740
--
discussions on the linings
viewtopic.php?t=9253
https://www.mtfca.com/discus/messages/1 ... 1279998740The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
AndyClary
- Posts: 835
- Joined: Sun Jan 06, 2019 11:15 am
- First Name: Andrew
- Last Name: Clary
- * REQUIRED* Type and Year of Model Ts owned: 1914 Runabout 1926 Coupe. Mercury Speedster #1249
- Location: Usa
Re: How to install Rocky Mountain Brake linings
When I reline Rockies I clamp the band and lining to a drum, squeezing it together like they would when operating. After aligning the band and lining I drill all the holes. Disassemble, countersink the holes and the rivet lining to the band from the middle out.
Andy
Andy