Speedometer cable grease
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 56
- Joined: Mon Feb 11, 2019 9:01 pm
- First Name: Todd
- Last Name: Retterer
- * REQUIRED* Type and Year of Model Ts owned: 1919 Touring
- Location: Climax, Ohio
Speedometer cable grease
I pulled my speedometer cable out today for cleaning. I have a Stewart 160 speedometer with a wire cable. What grease should I use and how much of the cable should I grease?
-
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Speedometer cable grease
With a more modern wire type cable I would wipe a light coating of chain bar oil, and feed the cable back into the housing from the bottom. This will eliminate build up of lubricant near the speedo head.
Allan from down under.
Allan from down under.
-
Topic author - Posts: 56
- Joined: Mon Feb 11, 2019 9:01 pm
- First Name: Todd
- Last Name: Retterer
- * REQUIRED* Type and Year of Model Ts owned: 1919 Touring
- Location: Climax, Ohio
Re: Speedometer cable grease
Thanks for the response. I've got a jug or two of bar oil in the barn.