Rear fender brackets on a 26 roadster

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic

Topic author
fordt
Posts: 162
Joined: Wed Jun 19, 2019 5:21 pm
First Name: Rob
Last Name: Trippet
* REQUIRED* Type and Year of Model Ts owned: 27 Roadster PU (in progress)
Location: Comfort, TX

Rear fender brackets on a 26 roadster

Post by fordt » Mon Feb 10, 2025 6:11 pm

Should one put a washer BETWEEN the bottom (forward) hole of the rear bracket and the frame to make up for the thickness of the fender? The top (rear) hole goes thru the bracket and the fender. Or is the thickness of the fender so negligible that the bracket will just bend enough to pull it up against the frame anyway?
Top
User avatar

TMiller6
Posts: 278
Joined: Sun Jan 06, 2019 10:11 pm
First Name: Thomas
Last Name: Miller
* REQUIRED* Type and Year of Model Ts owned: 16, 24, 26 Touring - 26 Roadster and Fordor
Location: SE MI
Board Member Since: 2006

Re: Rear fender brackets on a 26 roadster

Post by TMiller6 » Mon Feb 10, 2025 6:17 pm

I did not use washers on my rear fender brackets. Everything bolted up fine.
Tom Miller
One who cannot find beauty in an engine cannot find beauty in the universe.
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”