Tube Stem covers????

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Dan Hatch
Posts: 5009
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Tube Stem covers????

Post by Dan Hatch » Wed Apr 16, 2025 11:55 am

Does any one know what cover will fit a Blockley meter stem tube? Could not find anything on their site about stems Thanks Dan


Original Smith
Posts: 3699
Joined: Tue Jan 08, 2019 10:43 am
First Name: Larry
Last Name: Smith
* REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
Location: Lomita, California
MTFCA Life Member: YES

Re: Tube Stem covers????

Post by Original Smith » Wed Apr 16, 2025 1:53 pm

I refuse to use a tube with the incorrect valve stem. For that reason I have to buy tubes that have rubber stems. i have to cut them off and sand them down smooth to be able to use original valve stems. The Model A guys seem to have solved that problem.


Allan
Posts: 6609
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Tube Stem covers????

Post by Allan » Wed Apr 16, 2025 8:40 pm

The Blocklley, and Michelin tubes both use the more common larger size than those used on T's. Any combination of the appropriate Schraeder stem nuts, dust caps will fit these stems. Or you could use period correct Dill dust covers with the sliding internal threaded piece. These fit any stem, rubber included, because they thread onto the small end thread common to all stems. Just screw them on until they start to firm up, slide the cover down to the desired position to cover the stem, and screw them up firmly. You have the added bonus of a valve core removal tool on the end of the cover.

Allan from down under.


Topic author
Dan Hatch
Posts: 5009
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Tube Stem covers????

Post by Dan Hatch » Wed Apr 16, 2025 10:06 pm

Thanks Allen

User avatar

Steve Jelf
Posts: 7237
Joined: Fri Jan 04, 2019 9:37 pm
First Name: Steve
Last Name: Jelf
* REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
Location: Parkerfield, Kansas
Board Member Since: 2007
Contact:

Re: Tube Stem covers????

Post by Steve Jelf » Thu Apr 17, 2025 12:32 pm

The inevitable often happens.
1915 Runabout
1923 Touring

User avatar

Jugster
Posts: 181
Joined: Sun Jan 06, 2019 6:41 pm
First Name: Bob
Last Name: Coiro
* REQUIRED* Type and Year of Model Ts owned: 1915 Touring
Location: Commack, NY
Board Member Since: 2009

Re: Tube Stem covers????

Post by Jugster » Fri Apr 18, 2025 10:14 am

Some folks are purists and my hat is off to them. It takes a lot of work and dedication to maintain a car in perfectly stock condition—and keep it operating. My '15 Touring is a "driver" and it's all I can do to keep the thing running. I've been using the same rubber-stem inner-tubes for about a dozen years and when something works well, I'm awfully reluctant to rock the boat. So I hide the rubber stems with the brass covers that Lang's sells.

User avatar

Steve Jelf
Posts: 7237
Joined: Fri Jan 04, 2019 9:37 pm
First Name: Steve
Last Name: Jelf
* REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
Location: Parkerfield, Kansas
Board Member Since: 2007
Contact:

Re: Tube Stem covers????

Post by Steve Jelf » Fri Apr 18, 2025 11:18 am

I'm not an ace Model T mechanic who can diagnose and fix all problems. But this one is simple. It ain't rocket surgery. I found it wonderfully easy to find old metal stems and buy them cheap at swap meets. Saving money by buying tubes with rubber stems and installing old metal stems is so simple that even I can do it. If you find this intimidating because you have never done it, you may be pleasantly surprised when you try it.
The inevitable often happens.
1915 Runabout
1923 Touring

Post Reply Previous topicNext topic