Door Garnish photos needed for part made out of unobtainium.
Does anyone have clear photos of the three metal garnish items on a coupe door, want top, front, and rear of door around the window glass. Since I cannot buy all three and want them to match, I might as well make them. We already have the two window sill metal garnish pieces. A photo of them installed in place would be great, how they interact if at all. I already have new square nuts and #10-32 oval head, slot drive stainless screws. Each garnish has three screw holes.
Thanks!
Door Garnish photos needed for part made out of unobtainium.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
varmint
Topic author - Posts: 853
- Joined: Mon Jan 07, 2019 2:02 pm
- First Name: Vernon
- Last Name: Worley
- * REQUIRED* Type and Year of Model Ts owned: October 26, 1926 Coupe
- Location: New Orleans, LA
- Contact:
Door Garnish photos needed for part made out of unobtainium.
Vern (Vieux Carre)
-
varmint
Topic author - Posts: 853
- Joined: Mon Jan 07, 2019 2:02 pm
- First Name: Vernon
- Last Name: Worley
- * REQUIRED* Type and Year of Model Ts owned: October 26, 1926 Coupe
- Location: New Orleans, LA
- Contact:
Re: Door Garnish photos needed for part made out of unobtainium.
n/m I don't know what I am taking about. I finally found some photos and now realize that there are two brackets, front and rear of the door glass that support a U shaped garnish that slides down from the top.
Vern (Vieux Carre)
-
Humblej
- Posts: 1977
- Joined: Sun Jan 06, 2019 12:23 pm
- First Name: Jeff
- Last Name: Humble
- * REQUIRED* Type and Year of Model Ts owned: 1926 Canadian coupe, 1924 TT C-cab, 1924 runabout
- Location: Charlevoix, Mi
- Board Member Since: 2006
Re: Door Garnish photos needed for part made out of unobtainium.
The 26-27 coupe door is the same as the 1928 Model A closed cab pick up door. For some reason the Model A guys have better reproduction parts than a lot of the T stuff available. They are available as reproductions by Snyders Antique Auto Parts.
-
varmint
Topic author - Posts: 853
- Joined: Mon Jan 07, 2019 2:02 pm
- First Name: Vernon
- Last Name: Worley
- * REQUIRED* Type and Year of Model Ts owned: October 26, 1926 Coupe
- Location: New Orleans, LA
- Contact:
Re: Door Garnish photos needed for part made out of unobtainium.
Jeff,
Thanks, ordered the two garnish pieces and four brackets for Coupe from Snyder's. It was all in stock.
I also appreciate the window glass installation instructions in an old post.
Thanks, ordered the two garnish pieces and four brackets for Coupe from Snyder's. It was all in stock.
I also appreciate the window glass installation instructions in an old post.
Vern (Vieux Carre)