Suggested Cherry stain for a brass Model T firewall?

[NealW]

I am restoring a 1914 T that will be getting a new firewall. When I restored our 1911 Touring, I used Laurel Mountain Forge antique cherry stain, based on recommendations on the forum site. It really is a good match for the original stain Ford used, when comparing it to the portions of the firewall that had been hidden for over 100 years.

This weekend I looked to buy another bottle of LMF cherry stain, but the few online places that carried the stain show that it is out of stock. I have sent a message to LMF to see if or when it is still available, but in case it is not, does anyone have another stain recommendation? As can be seen in the picture pasted below, the stain is quite red, as the firewall is in the areas that had been hidden from view.

Thanks,

Neal

[love2T's]

Well naturally their website is down for maintenance.
But, did you try calling them? Not sure how the same number works for both phone/fax but here it is anyway if you don't have it.
I'd call em!

phone/fax: (219) 548-2950

[Rich P. Bingham]

. . . I have sent a message to LMF to see if or when it is still available, but in case it is not, does anyone have another stain recommendation? . . .

A restoration tip from the HCCA in the 1950s recommended making your own stain using artist’s oil paint. Alizarin Crimson tube paint diluted to a working consistency with a 50/50 mixture of spar varnish and boiled linseed oil. I used this mixture to “refresh” the failing dash on my ‘13 when I first got it, and the color on cherry wood is very acceptable.

One caveat, if you go this route, be sure you buy a professional grade of paint, full bodied pigment in linseed oil. Student grade colors are extended with fillers, and beware of “oil” paint that “cleans up with water”. Walnut oil or safflower oil yields weak paint films.

[NealW]

Well naturally their website is down for maintenance.
But, did you try calling them? Not sure how the same number works for both phone/fax but here it is anyway if you don't have it.
I'd call em!

phone/fax: (219) 548-2950

I tried calling them and no one answered the phone, and no way to leave a message...

[ThreePedalTapDancer]

I read on another rifle stock refinishing forum that the website and business Laurel Mountain Forge has been shuttered since April, because the owners wife passed away. The son was rumored to have an interest of taking over, but it doesn’t seem likely at this point. The various custom stains were prized by the rifle community, and all sources have dried up and no inventory appears to be returning to the retailers either.

[love2T's]

Well naturally their website is down for maintenance.
But, did you try calling them? Not sure how the same number works for both phone/fax but here it is anyway if you don't have it.
I'd call em!

phone/fax: (219) 548-2950

I tried calling them and no one answered the phone, and no way to leave a message...

Well that sucks! Sorry to hear that, keep trying? Maybe they closed up for vacation while their website is being re-worked?
It's a great product and the closest to original you can get, so I'm very supportive of their product. Good luck!

[love2T's]

I read on another rifle stock refinishing forum that the website and business Laurel Mountain Forge has been shuttered since April, because the owners wife passed away. The son was rumored to have an interest of taking over, but it doesn’t seem likely at this point. The various custom stains were prized by the rifle community, and all sources have dried up and no inventory appears to be returning to the retailers either.

Oh crap, I should've read THIS before posting my reply to a PM to the OP. Wow, how many times does this happen in a family business eh? Such a shame. What I wouldn't have given back when I was younger to have a business dropped in my lap. These young'uns just got no sense, ambition, or both. Again, what a shame.