Top snaps, what are these things?

[parrothead]

I’m missing a few of the inserts for these top snaps that go into the rear top bow on my touring. Any idea on what these are called and where to get replacements?

[Mike Silbert]

What you are looking for is difficult to find and rarely made.
I don't know where to but these other than on used parts and salvage them.
Hopefully the forum has a source.

It is in the same family as these that are still listed as being available, sorta.
https://www.modeltford.com/item/SNAP-R.aspx
https://www.modeltford.com/item/SNAP-M.aspx

Sorry I can't be of more help

[Original Smith]

I don't think Ford used that style.

[modeltspaz]

Contact Mike Francis at Classtique Auto Upholstery. He may have what you're looking for. They're listed in the Vendor section.

Good luck,
Mike "modeltspaz" Spaziano.

[Eric Sole]

This is the correct fastener for the Improved cars (26-27).

If you're looking for the "receiving" part (socket), then this will work: https://www.modeltford.com/item/SNAP-R.aspx.
The problem is that this part does not allow for the thickness of the side curtains, so the fastener on the top won't close properly into the socket if side curtains are used.

The original socket has an extension to hold the fastener outward, the same thickness as the side curtain fabric so the fastener will close properly. I don't know where the original type socket can be had. If anyone has a couple, I need them

Here is the fastener. In the closed position, you can see the area that the side curtain would occupy.

If you need the "male" fastener, Mike at Classtique sells them. The first one with the ring requires a special tool for installation which he also sells.

Fastener-flush male ring-Classtique.png (110.83 KiB) Viewed 116 times

If you use the prong type, you don't need the special tool.

Fastener-flush male prongs-Classtique.png (109.19 KiB) Viewed 116 times

[Dan Hatch]

Found these in some of my stuff.