Carburettor info

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Davey1916
Posts: 12
Joined: Mon Jun 17, 2019 8:07 pm
First Name: Cameron
Last Name: Davey
Location: Perth Australia
Board Member Since: 2015

Carburettor info

Post by Davey1916 » Mon Oct 07, 2019 5:04 am

Hi all,
Currently rebuilding several carburettors and looking for some info on settings, parts and photos.
Stromberg OE-1
Tillotson R-6A
Tillotson R-4A
Tillotson S-4C
Tillotson S-4D
Koala brass Carb (don't have a model number but same as Tillotsons)
Atom Brass Carb (don't have a model number but same as Tillotsons)
If anyone knows where I can get new needles seats or gaskets ect from that would be great too.
I can take photos of the carburettors too if that helps.

Cheers
Cam from DownUnder

User avatar

Henry K. Lee
Posts: 3186
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
Location: South Pittsburg, TN
MTFCA Number: 479
MTFCA Life Member: YES

Re: Carburettor info

Post by Henry K. Lee » Mon Oct 07, 2019 7:29 am

Photos would help.

Hank from up yonder

User avatar

Henry K. Lee
Posts: 3186
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
Location: South Pittsburg, TN
MTFCA Number: 479
MTFCA Life Member: YES

Re: Carburettor info

Post by Henry K. Lee » Mon Oct 07, 2019 7:29 am

Photos would help.

Hank from up yonder


StanHowe
Posts: 672
Joined: Mon Jan 07, 2019 5:42 pm
First Name: Stan
Last Name: Howe
Location: Helena, MT
MTFCA Number: 19133
Board Member Since: 1999

Re: Carburettor info

Post by StanHowe » Mon Oct 07, 2019 11:56 am

I make a needle and seat conversion for Stromberg carbs. There are very few gaskets in an oe-1 but I can also supply those.
No help on the tillotsons.


Topic author
Davey1916
Posts: 12
Joined: Mon Jun 17, 2019 8:07 pm
First Name: Cameron
Last Name: Davey
Location: Perth Australia
Board Member Since: 2015

Re: Carburettor info

Post by Davey1916 » Wed Oct 09, 2019 9:47 am

Thanks Stan pm sent

User avatar

Henry K. Lee
Posts: 3186
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
Location: South Pittsburg, TN
MTFCA Number: 479
MTFCA Life Member: YES

Re: Carburettor info

Post by Henry K. Lee » Wed Oct 09, 2019 7:32 pm

Found some info on the S-4 (A & B) Models but no C or D. Looks like the inlet is the only difference?

Hank

Post Reply Previous topicNext topic