I am missing the portion of the hood former on my SR that goes from the steering column across the top of hood then down the left side. I do have the small piece that goes from the steering column vertically down the right side. I haven't been able to find one so my question is if I fabricate one is the hood dimensionally the same on both ends so I can use the radiator as a pattern? The hood is flimsy enough that accurate measurements of it are difficult.
thanks Jim
SR hood former
-
JvanMaanen
Topic author - Posts: 188
- Joined: Sun Jan 06, 2019 6:25 pm
- First Name: Jim
- Last Name: Van Maanen
- * REQUIRED* Type and Year of Model Ts owned: 15 Touring, 19 roadster, 22 Coupe, 08 SR
- Location: Friday Harbor, WA
- MTFCA Life Member: YES
-
Jerry VanOoteghem
- Posts: 4290
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
Re: SR hood former
I don't believe the radiator would be a good template for you. Do you have the hood? If so, I would use that as your template instead.