Steel Truss Head Rivets 3/16" x 1"

Post parts wanted or for sale here
Post Reply Previous topicNext topic

Topic author
Rodger Erickson
Posts: 449
Joined: Sun Jan 13, 2019 9:58 am
First Name: Rodger
Last Name: Erickson
* REQUIRED* Type and Year of Model Ts owned: 1920 Speedster
Location: Simi Valley, CA

Steel Truss Head Rivets 3/16" x 1"

Post by Rodger Erickson » Fri Feb 10, 2023 10:57 am

Free: I still have a whole bunch of Truss Head (or mushroom head or brazier head) rivets, with a 3/16" x 1" shank, made of what I'm pretty sure is mild steel. Some surface rust is present but they should clean up pretty easily. I believe these would be well-suited for riveting wood slats to a steel frame, as you would on a pickup bed or depot hack body, as long as the wood isn't too thick. You pay shipping, of course. I believe I can fit approx 4 lbs (roughly 250 - 300 pcs.) into one USPS "Small Flat Rate" box.

Sorry if this is slightly off-topic but Model T Guys are the only folks that seem at all interested in stuff like this.

Thanks for looking
316riv01.jpg
316riv02.jpg
Last edited by Rodger Erickson on Fri Apr 04, 2025 10:20 am, edited 1 time in total.
Top

tman12
Posts: 178
Joined: Fri Jan 11, 2019 12:31 pm
First Name: john
Last Name: Willams
* REQUIRED* Type and Year of Model Ts owned: '09 Roadstr, '12 Touring, '26 Fronti Speedster
Location: Cedar Rapids Iowa

Re: Steel Truss Head Rivets 3/16" x 1 1/4"

Post by tman12 » Fri Feb 10, 2023 5:16 pm

Hi From Iowa1 I couls use some if available? Thanks John
Top

Topic author
Rodger Erickson
Posts: 449
Joined: Sun Jan 13, 2019 9:58 am
First Name: Rodger
Last Name: Erickson
* REQUIRED* Type and Year of Model Ts owned: 1920 Speedster
Location: Simi Valley, CA

Re: Steel Truss Head Rivets 3/16" x 1 1/4"

Post by Rodger Erickson » Sat Aug 05, 2023 3:09 pm

Still have a bunch of these; let me know if you're interested.
Top

speedytinc
Posts: 4725
Joined: Fri Feb 12, 2021 12:24 pm
First Name: john
Last Name: karvaly
* REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
Location: orange, ca
Board Member Since: 2020

Re: Steel Truss Head Rivets 3/16" x 1 1/4"

Post by speedytinc » Sat Aug 05, 2023 4:05 pm

Not off topic. In fact, shorten them for 26-7 axle backing plate mounting.
Top

RGould1910
Posts: 1128
Joined: Tue Jan 22, 2019 8:16 am
First Name: Richard
Last Name: Gould
* REQUIRED* Type and Year of Model Ts owned: 1910 touring, 1912 roadster , 1927 roadster
Location: Folsom, CA

Re: Steel Truss Head Rivets 3/16" x 1 1/4"

Post by RGould1910 » Sat Aug 05, 2023 5:19 pm

I'd certainly appreciate a couple pounds. I use them on wood felloe wheels.
Top

Steves Ts
Posts: 84
Joined: Sun Mar 21, 2021 12:56 pm
First Name: Steven
Last Name: Meudt
* REQUIRED* Type and Year of Model Ts owned: 1913 touring / 1913 delivery / 1917 roadster / 1914 roadster pick up
Location: Dodgeville

Re: Steel Truss Head Rivets 3/16" x 1 1/4"

Post by Steves Ts » Sun Aug 06, 2023 8:41 am

Hi Rodger, I'm interested in the 4lb. Deal...please send me the price for shipping to 53533.
Top

Topic author
Rodger Erickson
Posts: 449
Joined: Sun Jan 13, 2019 9:58 am
First Name: Rodger
Last Name: Erickson
* REQUIRED* Type and Year of Model Ts owned: 1920 Speedster
Location: Simi Valley, CA

Re: Steel Truss Head Rivets 3/16" x 1 1/4"

Post by Rodger Erickson » Sat Aug 12, 2023 11:55 am

Got more of these if anyone's interested.
Top

Topic author
Rodger Erickson
Posts: 449
Joined: Sun Jan 13, 2019 9:58 am
First Name: Rodger
Last Name: Erickson
* REQUIRED* Type and Year of Model Ts owned: 1920 Speedster
Location: Simi Valley, CA

Re: Steel Truss Head Rivets 3/16" x 1 1/4"

Post by Rodger Erickson » Fri Jul 05, 2024 12:39 pm

Still have plenty more of these.
Top

Allan
Posts: 6609
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Steel Truss Head Rivets 3/16" x 1 1/4"

Post by Allan » Fri Jul 05, 2024 8:09 pm

Rodger, if you ever get round head ones I'd like those for the rivets on Canadian style mufflers I make.

Allan from down under.
Top

Topic author
Rodger Erickson
Posts: 449
Joined: Sun Jan 13, 2019 9:58 am
First Name: Rodger
Last Name: Erickson
* REQUIRED* Type and Year of Model Ts owned: 1920 Speedster
Location: Simi Valley, CA

Re: Steel Truss Head Rivets 3/16" x 1"

Post by Rodger Erickson » Fri Apr 04, 2025 10:21 am

The 1" ones are still available! You pay shipping and they're yours.
Top

Richard K
Posts: 257
Joined: Mon Jan 14, 2019 4:02 pm
First Name: Richard
Last Name: Kemp
* REQUIRED* Type and Year of Model Ts owned: 1926 TT Tow Truck
Location: Beavercreek OH

Re: Steel Truss Head Rivets 3/16" x 1"

Post by Richard K » Sat Apr 05, 2025 10:22 am

Hi Rodger, I'll take them. Thanks Rich
Top

William Rathert
Posts: 15
Joined: Thu Dec 29, 2022 8:50 pm
First Name: William
Last Name: Rathert
* REQUIRED* Type and Year of Model Ts owned: 4
Location: Nortonville Kansas

Re: Steel Truss Head Rivets 3/16" x 1"

Post by William Rathert » Sat Apr 05, 2025 1:36 pm

Could use a couple pounds if still available. Thanks.
Top

OilyBill
Posts: 641
Joined: Sat Apr 25, 2020 3:51 pm
First Name: William
Last Name: May
* REQUIRED* Type and Year of Model Ts owned: 1914 Runabout
Location: Tucson, Arizona

Re: Steel Truss Head Rivets 3/16" x 1"

Post by OilyBill » Sat Apr 05, 2025 11:41 pm

What's the price on these for 4 lbs? I understand shipping is additional. No problem there!
Thanks!
Top

model t americana
Posts: 4
Joined: Thu Oct 08, 2020 7:00 am
First Name: Dean
Last Name: Dodson
* REQUIRED* Type and Year of Model Ts owned: 1925 Touring, 1914 Touring, 1911 Torpedo
Location: Douglass Kansas

Re: Steel Truss Head Rivets 3/16" x 1"

Post by model t americana » Tue Apr 08, 2025 7:17 am

I’ll take 4 lbs if you still have some. Dean
Top

Topic author
Rodger Erickson
Posts: 449
Joined: Sun Jan 13, 2019 9:58 am
First Name: Rodger
Last Name: Erickson
* REQUIRED* Type and Year of Model Ts owned: 1920 Speedster
Location: Simi Valley, CA

Re: Steel Truss Head Rivets 3/16" x 1"

Post by Rodger Erickson » Mon Jun 23, 2025 8:41 am

Still got a bunch of these.
Top
User avatar

babychadwick
Posts: 652
Joined: Tue Jan 08, 2019 7:03 am
First Name: Chad
Last Name: Azevedo
* REQUIRED* Type and Year of Model Ts owned: 1926 Boattail speedster, 1912 Tourabout project, 1927 Speedster (build), 1929 Buick (future T tow car)
Location: Henderson, TN
Board Member Since: 1999

Re: Steel Truss Head Rivets 3/16" x 1"

Post by babychadwick » Mon Jun 23, 2025 11:05 am

Sign me up for a batch, on the road now but will be back next week.
"Those who fail to plan, plan to fail"
Top

blauvelt
Posts: 249
Joined: Thu Jan 17, 2019 3:26 pm
First Name: Douglas
Last Name: Ogden
Location: Tucson?

Re: Steel Truss Head Rivets 3/16" x 1"

Post by blauvelt » Mon Jun 23, 2025 1:37 pm

I’ll throw in for a small flat rate box.
Top
Post Reply Previous topicNext topic

Return to “Classifieds - Parts”