FOUND - Waukesha intake manifold

Scott_Conger · Post by **Scott_Conger** » Mon Jan 16, 2023 10:30 am

I would like to purchase a manifold as pictured (photo credit to Ken Jackman)

Please email me

Thank you

: Waukesha Ricardo Intake cropped.jpg (11.96 KiB) Viewed 6304 times

DustySpokes · Post by **DustySpokes** » Mon Jan 16, 2023 4:59 pm

Now THIS is a noble pursuit Scott ! Of all the aftermarket Model T intake manifolds that were made I would venture to say the Waukesha is THE toughest one to find.

ThreePedalTapDancer · Post by **ThreePedalTapDancer** » Mon Jan 16, 2023 6:42 pm

Certainly worthy of reproducing. I’ve only seen one in all my travels.

Post by **Don ellis** » Tue Jan 17, 2023 4:11 pm

what are they worth when you find one?

Scott_Conger · Post by **Scott_Conger** » Tue Jan 17, 2023 5:04 pm

Frankly, who knows? I've never seen one for sale. I suppose it all come down to condition and who wants to own it more...seller or buyer. With no established market or recognized margin of "improvement" it would bring relative to performance of the car, I think there is probably a range of $ with some upper limit established by other oddball intakes or accessories.

Scott_Conger · Post by **Scott_Conger** » Sat Feb 04, 2023 9:19 pm

I have several cars with Waukesha heads and continue to look for a really nice example of the intake manifold to marry up with my '19

thank you for looking, and a very special thank you to the Forum Member who emailed me about one.

Scott_Conger · Post by **Scott_Conger** » Sun Feb 12, 2023 3:57 pm

still looking
thank you

ThreePedalTapDancer · Post by **ThreePedalTapDancer** » Sun Feb 12, 2023 4:53 pm

Might be easier to borrow one and have some cast. I’d purchase a good repo if available.

Scott_Conger · Post by **Scott_Conger** » Sat Feb 18, 2023 8:53 pm

still looking

thank you

Scott_Conger · Post by **Scott_Conger** » Sun Feb 26, 2023 9:26 pm

weekly bump

1stnow · Post by **1stnow** » Mon Feb 27, 2023 1:16 pm

Scott, I have one. What is your offer.? Russ Furstnow.

Post by **Russ_Furstnow** » Mon Feb 27, 2023 1:38 pm

Scott, I've had this manifold for many years, and I'm not too interested in selling it, but you may want it more than I care to keep it. Russ Furstnow

Scott_Conger · Post by **Scott_Conger** » Mon Apr 03, 2023 8:01 pm

I foolishly let this one slip by...

salvage your Tulare non-trip by selling me yours!

Scott_Conger · Post by **Scott_Conger** » Sun May 07, 2023 2:02 pm

time for a bump

Scott_Conger · Post by **Scott_Conger** » Fri Jul 12, 2024 12:50 pm

bump up to the top

WorldChamp1914 · Post by **WorldChamp1914** » Fri Jul 12, 2024 4:34 pm

Any more out there?

ThreePedalTapDancer · Post by **ThreePedalTapDancer** » Fri Jul 12, 2024 5:00 pm

Yes they are out there. Two were bought last year at the same swap meet. I was hoping someone would borrow one and have some repops made.

WorldChamp1914 · Post by **WorldChamp1914** » Sat Jul 13, 2024 9:27 pm

The thrill of the chase…….if one can find one where would one find a good foundry to reproduce it?

WorldChamp1914 · Post by **WorldChamp1914** » Wed Jul 24, 2024 3:57 pm

Back to the top.

Philip Lawrence · Post by **Philip Lawrence** » Thu Jul 25, 2024 12:30 pm

Gary, There are a couple within driving distance from you. Getting a match plate pattern made to cast the part might be more of a problem. The foundry can direct you with that.

Scott_Conger · Post by **Scott_Conger** » Sun Aug 11, 2024 9:55 pm

By way of an extraordinary fellow, Dave Simmering, I now have what I was looking for.

With deepest gratitude, thank you Dave

WorldChamp1914 · Post by **WorldChamp1914** » Fri Aug 16, 2024 6:46 pm

I haven’t found one yet.

Post by **JTT3** » Fri Aug 16, 2024 7:19 pm

Start a new thread for you, that may help. Best John

MTFCA Forum