wtb oil pan ear
-
robertw413
Topic author - Posts: 25
- Joined: Tue Jan 05, 2021 2:27 pm
- First Name: robert
- Last Name: wright
- Location: woodbine md
wtb oil pan ear
looking for an oil pan ear late style
-
speedytinc
- Posts: 4725
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: wtb oil pan ear
Specify for 3 or 4 dip. They are different.
-
robertw413
Topic author - Posts: 25
- Joined: Tue Jan 05, 2021 2:27 pm
- First Name: robert
- Last Name: wright
- Location: woodbine md
Re: wtb oil pan ear
4 dip but i will make a 3 dip work if i have to
-
Allan
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: wtb oil pan ear
Once the flange was added to the outer edge of the pan I believe the pan ears were dimensionally the same. I believe the only difference was the later arms were cut square on the bottom. This squared off design came well before the introduction of the 4 dip pan on our Canadian cars.
Allan from down under.
Allan from down under.
-
TRDxB2
- Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: wtb oil pan ear
I have 4 of #1 ($35each) and one of #2 ($50) plus shipping for any choice
- Attachments
-
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
Craig Leach
- Posts: 1906
- Joined: Tue Jan 08, 2019 12:22 am
- First Name: craig
- Last Name: leach
- * REQUIRED* Type and Year of Model Ts owned: 1919 Firetruck/1922 Speedster
- Location: Laveen Az
Re: wtb oil pan ear
Hi Robert,
Are you looking for a NOS pan ear or a used one? Have you ever removed one before? I took one off of a pan & replaced it with one taken off another pan. Told myself never again! But that was when I had two pans with each with a broken off ear so didn’t have much choice. Someone was making a repair part that welded into a cracked or broken ear to make it strong enough to prevent it from breaking again.
I use the no side bolt & spring on top as in Tinkerin Tips volume II & have had good luck with that method in both the firetruck ( very heavy) & the speedster ( driven like I stole it)
I don’t know anyone that has used the repair ears long term but I keep a set on hand.
Craig.
Are you looking for a NOS pan ear or a used one? Have you ever removed one before? I took one off of a pan & replaced it with one taken off another pan. Told myself never again! But that was when I had two pans with each with a broken off ear so didn’t have much choice. Someone was making a repair part that welded into a cracked or broken ear to make it strong enough to prevent it from breaking again.
I use the no side bolt & spring on top as in Tinkerin Tips volume II & have had good luck with that method in both the firetruck ( very heavy) & the speedster ( driven like I stole it)
I don’t know anyone that has used the repair ears long term but I keep a set on hand.
Craig.
-
robertw413
Topic author - Posts: 25
- Joined: Tue Jan 05, 2021 2:27 pm
- First Name: robert
- Last Name: wright
- Location: woodbine md
Re: wtb oil pan ear
i found a set on e-pay and yes i have replaced them a couple of times