Re-babbitted ball cap ( 4th. main )
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re-babbitted ball cap ( 4th. main )
Model T ball cap re-babbitted and bored to Standard or you specified diameter ...price is $50.00 + exchange + $19.30 priority flat rate mail in lower 48 states or actual postage outside this area or INTERNATIONAL ...Gene French 970-581-2808 or gfrench1953@hotmail.com
Last edited by Gene_French on Sat Jan 04, 2025 10:37 am, edited 1 time in total.
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA
-
Nv Bob
- Posts: 799
- Joined: Mon Jan 07, 2019 11:04 pm
- First Name: Bob
- Last Name: Middleton
- * REQUIRED* Type and Year of Model Ts owned: 18 roadster 1810 brand X
- Location: Western nv
Re: Re-babbitted ball cap ( 4th. main )
Gene
I been digging have two so far and befor I send them got one more pile to dig on
Nv bob
I been digging have two so far and befor I send them got one more pile to dig on
Nv bob
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
Bob:
thanks for looking ... if you can send a batch that cuts down on the mailing cost per item ... always an optimist Gene French
thanks for looking ... if you can send a batch that cuts down on the mailing cost per item ... always an optimist Gene French
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA
-
Tim D
- Posts: 207
- Joined: Fri Jun 05, 2020 7:48 pm
- First Name: Tim
- Last Name: Dickson
- * REQUIRED* Type and Year of Model Ts owned: 1912 speedster 1911 Torepdo
- Location: wi
Re: Re-babbitted ball cap ( 4th. main )
Do you buy bad ones for cores?
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ... thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ... thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA
-
Shrshot
- Posts: 82
- Joined: Thu Dec 26, 2024 9:38 pm
- First Name: Kent
- Last Name: Palazzo
- * REQUIRED* Type and Year of Model Ts owned: 1926 Tudor
- Location: Algoma, WI
Re: Re-babbitted ball cap ( 4th. main )
Gene I need to replace my 4th main ball cap. Where should I take the measurement to determine if I need std. or .002 under? I pulled the rear axle assembly, and have quite a bit of oil in the torque tube leaking from the ball cap. Have to repair/rebuild rear diff as spool housing is cracked and leaking grease also. Oh the joys....
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
Kent:
you will measure the clutch plate ... probably with a dial or vernier caliper ... with the ball cap removed you will reach into the hogs head with the caliper jaws and measure the outside diameter of the clutch plate tailshaft ...access is difficult with anything except a long jaw caliper or the removal of the hogshead ...
you will measure the clutch plate ... probably with a dial or vernier caliper ... with the ball cap removed you will reach into the hogs head with the caliper jaws and measure the outside diameter of the clutch plate tailshaft ...access is difficult with anything except a long jaw caliper or the removal of the hogshead ...
-
Shrshot
- Posts: 82
- Joined: Thu Dec 26, 2024 9:38 pm
- First Name: Kent
- Last Name: Palazzo
- * REQUIRED* Type and Year of Model Ts owned: 1926 Tudor
- Location: Algoma, WI
Re: Re-babbitted ball cap ( 4th. main )
Thanks Gene, I will get ahold of you when I get the ball cap out and shaft measured.
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ... thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...Thanks MTFCA
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: Re-babbitted ball cap ( 4th. main )
to the top again ...thanks MTFCA