1/4x18 tap
-
Psainslie
Topic author - Posts: 46
- Joined: Sun Jan 27, 2019 8:13 pm
- First Name: Patrick
- Last Name: Ainslie
- * REQUIRED* Type and Year of Model Ts owned: 1911 & 1919
- Location: Bloomfield Hills, MI
1/4x18 tap
WTB this is a strange size but I thought someone might have one laying around 1/4x18 tap. If so contact psainslie@yahoo.com. Thank you Pat
-
GGZ
- Posts: 911
- Joined: Tue Jan 08, 2019 7:00 pm
- First Name: Guy
- Last Name: Zinnanovich
- * REQUIRED* Type and Year of Model Ts owned: 1912 touring, 1915 Speedster
- Location: Detroit
Re: 1/4x18 tap
https://www.ebay.com/itm/267294002958?_ ... R46x2Z6XZg
https://www.ebay.com/itm/360402250580?_ ... R46x2Z6XZg
Pat-I have been buying some odd ball taps and screws from Ebay for early racecar carburetors. Hopefully these help. Hope you are doing well.
https://www.ebay.com/itm/360402250580?_ ... R46x2Z6XZg
Pat-I have been buying some odd ball taps and screws from Ebay for early racecar carburetors. Hopefully these help. Hope you are doing well.
-
BigAl
- Posts: 186
- Joined: Mon Jan 07, 2019 11:37 am
- First Name: Alan
- Last Name: Stein
- * REQUIRED* Type and Year of Model Ts owned: 1911 Touring (August 1911)
- Location: Chesterfield, MI
Re: 1/4x18 tap
You can buy one at Home Depo for $7.48 and they ship for free either next day or within a day or two. You can check the internet for other deals.
-
Jerry VanOoteghem
- Posts: 4144
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
Re: 1/4x18 tap
Al,
I'm fairly certain that the one you can buy at Home Depot is a 1/4-18 NPT tap. In other words, a pipe thread. I am assuming Pat wants a straight thread tap. But, maybe not???
-
Jerry VanOoteghem
- Posts: 4144
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
Re: 1/4x18 tap
Those are pipe threads. Is that what you want Pat?GGZ wrote: ↑Sun Aug 17, 2025 5:26 pmhttps://www.ebay.com/itm/267294002958?_ ... R46x2Z6XZg
https://www.ebay.com/itm/360402250580?_ ... R46x2Z6XZg
Pat-I have been buying some odd ball taps and screws from Ebay for early racecar carburetors. Hopefully these help. Hope you are doing well.
-
Scott_Conger
- Posts: 6552
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: 1/4x18 tap
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
BigAl
- Posts: 186
- Joined: Mon Jan 07, 2019 11:37 am
- First Name: Alan
- Last Name: Stein
- * REQUIRED* Type and Year of Model Ts owned: 1911 Touring (August 1911)
- Location: Chesterfield, MI
Re: 1/4x18 tap
The Home Depot NPT tap is $14.98 the non NPT is $14.98
-
Psainslie
Topic author - Posts: 46
- Joined: Sun Jan 27, 2019 8:13 pm
- First Name: Patrick
- Last Name: Ainslie
- * REQUIRED* Type and Year of Model Ts owned: 1911 & 1919
- Location: Bloomfield Hills, MI
Re: 1/4x18 tap
Yes I’m looking for a straight thru tap. Not a NPT. Thanks for the help