Hi all - looking to purchase a KRW Driving Plate Bushing Reamer.
I have attached a pic of what I am looking for. Any leads would be be appreciated.
Please email or DM if you can help.
Regards
Simon
WTB (any brand) Original Driving Plate Bushing Reamer
-
Smbayley
Topic author - Posts: 25
- Joined: Mon Jan 07, 2019 6:30 pm
- First Name: Simon
- Last Name: Bayley
- * REQUIRED* Type and Year of Model Ts owned: 1925 Ford tourer
- Location: Australia
- Board Member Since: 2015
WTB (any brand) Original Driving Plate Bushing Reamer
- Attachments
-
Last edited by Smbayley on Fri Mar 24, 2023 1:22 am, edited 1 time in total.
-
Smbayley
Topic author - Posts: 25
- Joined: Mon Jan 07, 2019 6:30 pm
- First Name: Simon
- Last Name: Bayley
- * REQUIRED* Type and Year of Model Ts owned: 1925 Ford tourer
- Location: Australia
- Board Member Since: 2015
Re: WTB KRW Driving Plate Bushing Reamer
More info to help in my quest: KR Wilson reamer marked W-8 sometimes on the square drive end flats. About 13" long; shank 1" Dia.; cutter end reams Driver Plate bushing to 1" I. D. in Model T transmission when bolted to brake drum to ensure positive alignment of all three bushings when rebuilding transmission.
-
Smbayley
Topic author - Posts: 25
- Joined: Mon Jan 07, 2019 6:30 pm
- First Name: Simon
- Last Name: Bayley
- * REQUIRED* Type and Year of Model Ts owned: 1925 Ford tourer
- Location: Australia
- Board Member Since: 2015
Re: WTB KRW Driving Plate Bushing Reamer
Bump up the list - can anyone help out?
-
havnfun
- Posts: 469
- Joined: Sun Jan 06, 2019 11:27 am
- First Name: Joe
- Last Name: Kowalczyk
- * REQUIRED* Type and Year of Model Ts owned: 1918 Speedster, 1913 Runabout, 1923 Roadster, 1912 Mother-in-law roadster
- Location: Kuna, Idaho
- Board Member Since: 2017
Re: WTB KRW Driving Plate Bushing Reamer
Just in case you’re open to a modern solution
https://drillsandcutters.com/h-hss-adju ... 16-1-1-16/
https://drillsandcutters.com/h-hss-adju ... 16-1-1-16/
Regards,
Joe Kowalczyk - 1923 Roadster, 1913 Runabout, 1918 Speedster, 1912 Mother-in-law roadster
Joe Kowalczyk - 1923 Roadster, 1913 Runabout, 1918 Speedster, 1912 Mother-in-law roadster
-
Dan Hatch
- Posts: 5018
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: WTB KRW Driving Plate Bushing Reamer
KRW were not only maker. Here is pictures of my Keystone reamer. Not for sale. But I have thought about having some made. Would not want to think about the cost!
-
RGould1910
- Posts: 1128
- Joined: Tue Jan 22, 2019 8:16 am
- First Name: Richard
- Last Name: Gould
- * REQUIRED* Type and Year of Model Ts owned: 1910 touring, 1912 roadster , 1927 roadster
- Location: Folsom, CA
Re: WTB KRW Driving Plate Bushing Reamer
Easy enuf to make. Buy a 15/16" chucking reamer on eBay and make a 1" sleeve to place over the 3/4" shank. Actually .999" per KRW . Best way to do it is make the sleeve a slip fit, then make it a permanent bond with sleeve retainer before turning the OD. Center by indexing off the reamer.
https://www.ebay.com/itm/351532060555?m ... media=COPY
https://www.ebay.com/itm/351532060555?m ... media=COPY
-
RGould1910
- Posts: 1128
- Joined: Tue Jan 22, 2019 8:16 am
- First Name: Richard
- Last Name: Gould
- * REQUIRED* Type and Year of Model Ts owned: 1910 touring, 1912 roadster , 1927 roadster
- Location: Folsom, CA
Re: WTB KRW Driving Plate Bushing Reamer
Have parts on order to make one. Will post results if there is an interest
-
Smbayley
Topic author - Posts: 25
- Joined: Mon Jan 07, 2019 6:30 pm
- First Name: Simon
- Last Name: Bayley
- * REQUIRED* Type and Year of Model Ts owned: 1925 Ford tourer
- Location: Australia
- Board Member Since: 2015
Re: WTB KRW Driving Plate Bushing Reamer
Please do and if you want to make two I would be interestedRGould1910 wrote: ↑Sun Mar 05, 2023 10:41 amHave parts on order to make one. Will post results if there is an interest
-
Smbayley
Topic author - Posts: 25
- Joined: Mon Jan 07, 2019 6:30 pm
- First Name: Simon
- Last Name: Bayley
- * REQUIRED* Type and Year of Model Ts owned: 1925 Ford tourer
- Location: Australia
- Board Member Since: 2015
Re: WTB KRW Driving Plate Bushing Reamer
Open to any brand reamers that would do this job? Message me if you can help me out 
