- IMG_0260.jpeg (38.12 KiB) Viewed 1096 times
Valve tools FS
-
Dan Hatch
Topic author - Posts: 5009
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Valve tools FS
Found these in a bucket of stuff. $7.50 + shipping for the pair. Email me at address in the pictures. Thanks Dan
-
Karl Von Neumann
- Posts: 674
- Joined: Thu Jan 06, 2022 10:52 am
- First Name: Karl
- Last Name: VonNeumann
- * REQUIRED* Type and Year of Model Ts owned: 1916 touring 1927 tudor 1926 hotrod 1913 speedster (project) 1926 coupe (project)
- Location: Pleasant prairie Wisconsin
- Board Member Since: 2022
Re: Valve tools FS
Are these the ford marked tools?
Please hold the other 6 voices are taking a vote
-
Dan Hatch
Topic author - Posts: 5009
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: Valve tools FS
Don’t know I don’t see any.
-
Dan Hatch
Topic author - Posts: 5009
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: Valve tools FS
Back to the top
-
Dan Hatch
Topic author - Posts: 5009
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: Valve tools FS
One time than scrap
-
Adam
- Posts: 1550
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- Board Member Since: 2000
Re: Valve tools FS
Good luck… I’ve probably tossed twenty or so of those in the scrap over the years. Problem is they only work with standard size valve guides that aren’t very worn (very low mileage original engines only) AND will only cut original cast iron seats… and only if they are sharp.
They ARE a nice display item though, and for the price hopefully someone will grab them.
-
Scott Rosenthal
- Posts: 390
- Joined: Sun Jan 13, 2019 11:29 am
- First Name: Scott
- Last Name: Rosenthal
- * REQUIRED* Type and Year of Model Ts owned: 12 Towncar, 12 Touring, 09 Touring
- Location: Cincinnati OH
Re: Valve tools FS
Thanks Frank. Ship address for the petcock with the "T" handle is
919 Mt. Hope Ave. Cinti, Ohio 45204
Please shoot me your address and total with shipping. Please do not use MTFCA messaging system, as mine either doesn't work or I have screwed something up so that it doesn't work properly.
Regards,
Scott
919 Mt. Hope Ave. Cinti, Ohio 45204
Please shoot me your address and total with shipping. Please do not use MTFCA messaging system, as mine either doesn't work or I have screwed something up so that it doesn't work properly.
Regards,
Scott