Set of 3 flanges made from 1/2” thick mild steel and will fit T/S model Fronty heads... maybe others. 2-3/4” bolt centers and 1-5/8” thru. These are laser cut then chamfered in the CNC. 3 sets available - $65 + shipping
Fronty header flanges
-
Kevin Pharis
Topic author - Posts: 1564
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Fronty header flanges
Only needed 1… wound up making 10!
Set of 3 flanges made from 1/2” thick mild steel and will fit T/S model Fronty heads... maybe others. 2-3/4” bolt centers and 1-5/8” thru. These are laser cut then chamfered in the CNC. 3 sets available - $65 + shipping
Set of 3 flanges made from 1/2” thick mild steel and will fit T/S model Fronty heads... maybe others. 2-3/4” bolt centers and 1-5/8” thru. These are laser cut then chamfered in the CNC. 3 sets available - $65 + shipping
-
Kevin Pharis
Topic author - Posts: 1564
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: Fronty header flanges
Consider em yours Richard! I’ll send an email to work out the details
-
Kevin Pharis
Topic author - Posts: 1564
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: Fronty header flanges
Turns out that a T/S model Fronty head has an exhaust port bolt spacing of 2-11/16”. Holes in the flanges have been reworked, and my dad has been reminded that guessing is not an accurate form of measurement
-
Dan McEachern
- Posts: 1402
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Fronty header flanges
Close counts for some stuff... Had the same problem with some carb flanges recently, luckily the boo boo fit other carbs I had. funny how 1/16th makes a difference