WTB rear axle truss for 26
-
Reno Speedster
Topic author - Posts: 573
- Joined: Tue May 26, 2020 6:23 pm
- First Name: Morgan
- Last Name: Blanchard
- * REQUIRED* Type and Year of Model Ts owned: 1926 Model T Speedster Project, 1922 Runabout Pickup
- Location: Anchorage, Alaska
WTB rear axle truss for 26
I am looking for a truss like the one below for the rear end of my 26 speedster. Let me know what you might have.
- Attachments
-
-
TRDxB2
- Posts: 6261
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: WTB rear axle truss for 26
Repro kit made by Model T RanchReno Speedster wrote: ↑Fri May 10, 2024 10:51 pmI am looking for a truss like the one below for the rear end of my 26 speedster. Let me know what you might have.
- Attachments
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
Todd Touchberry
- Posts: 5
- Joined: Sun Jan 08, 2023 2:20 pm
- First Name: Todd
- Last Name: Touchberry
- * REQUIRED* Type and Year of Model Ts owned: 1919. And 1920
- Location: Sumter SC
-
RajoRacer
- Posts: 5172
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
Re: WTB rear axle truss for 26
Early riveted housings were prone to flexing (and leaking) - the truss supposedly alleviated the stresses. That photo is of our '14 Touring !
-
Reno Speedster
Topic author - Posts: 573
- Joined: Tue May 26, 2020 6:23 pm
- First Name: Morgan
- Last Name: Blanchard
- * REQUIRED* Type and Year of Model Ts owned: 1926 Model T Speedster Project, 1922 Runabout Pickup
- Location: Anchorage, Alaska
Re: WTB rear axle truss for 26
Thanks for the link. My speedster uses lowering plates that cantilever off the rear axle. It will place some new forces on the axle not seen on a standard axle. Providing some extra support is not a bad idea. Plus, I like the look. About the only thing on this car that has not been changed/modified are the block, hogs head, and radiator.
-
Sarikatime
- Posts: 689
- Joined: Sun Jan 06, 2019 12:47 pm
- First Name: Frank
- Last Name: Seress
- * REQUIRED* Type and Year of Model Ts owned: 1912 Towncar, 1915 Touring
- Location: Prescott, Arizona
Re: WTB rear axle truss for 26
It is tricky to put a floor jack under the rear end with the truss in place. It is also difficult to know when you are supporting the axel or possibly over tightening and causing more problems than good. I adjusted mine several times but I was never happy with the functionality of the truss and nobody could tell me how tight or loose it should be. Now it is a decoration only, which I really like the look of, that is why I bought it.