Hours of design and fabrication have culminated in a series of dies to make perfect U & J gaskets. I anticipate having the throttle body gasket (done) as well as eventually, having the venturi and lower bowl seal as well, when I am done
If you're in line for any or all of these, great! If not, don't cry when they're gone and I don't do another run of them. I do this for the enjoyment of the challenge, not to get rich, so this will not be an ongoing effort as I will never get my $$ or time back...the dies are done, the parts will be punched and then it all goes on a back shelf. Thanks for looking.
as always: EMAIL ME TO CONTACT ME AND GET ON THE LIST
To those fellows who already have contacted me, thank you, and I will let you know when all 3 gaskets are available
The last ad I ran, 2 guys publicly posted to the ad that they were interested. As a result, I attempted to contact them privately with emails and PM's (3X) with no replies back. Nice.
Therefore, my policy of replying to public posts is now over. If you're interested, you know how to contact me through the FORUM as it is set up, and we won't have to play games.
Thank you.
Rarest of gaskets - U & J throttle body gasket dies finished
-
Topic author - Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Rarest of gaskets - U & J throttle body gasket dies finished
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured