This is a brass/nickel shell that will need cleaning.
The issue is on inside one vertical edge is is cracked, see picture.
I thought maybe someone could silver solder?
$125 plus shipping.
- t shell foot.jpg (29.08 KiB) Viewed 1613 times
FS high rad shell $100
-
fordrelic
Topic author - Posts: 467
- Joined: Sat Jan 12, 2019 11:15 am
- First Name: Clay
- Last Name: Atkins
- * REQUIRED* Type and Year of Model Ts owned: 1921 Roadster
- Location: Sumner, Il 62466
FS high rad shell $100
For Sale high radiator shell.
This is a brass/nickel shell that will need cleaning.
The issue is on inside one vertical edge is is cracked, see picture.
I thought maybe someone could silver solder?
$125 plus shipping.
This is a brass/nickel shell that will need cleaning.
The issue is on inside one vertical edge is is cracked, see picture.
I thought maybe someone could silver solder?
$125 plus shipping.
Last edited by fordrelic on Thu Nov 14, 2024 5:02 pm, edited 2 times in total.
-
BarnesvilleT
- Posts: 98
- Joined: Mon Nov 14, 2022 8:26 am
- First Name: William
- Last Name: Hallada
- * REQUIRED* Type and Year of Model Ts owned: 1926 Model T Coupe
- Location: Barnesville, GA
Re: FS high rad shell
Do you have the bottom flange on the left side?
-
fordrelic
Topic author - Posts: 467
- Joined: Sat Jan 12, 2019 11:15 am
- First Name: Clay
- Last Name: Atkins
- * REQUIRED* Type and Year of Model Ts owned: 1921 Roadster
- Location: Sumner, Il 62466
Re: FS high rad shell
its there, but it's hard to see in pictures. I can take closeup if you are interested.
-
BarnesvilleT
- Posts: 98
- Joined: Mon Nov 14, 2022 8:26 am
- First Name: William
- Last Name: Hallada
- * REQUIRED* Type and Year of Model Ts owned: 1926 Model T Coupe
- Location: Barnesville, GA
Re: FS high rad shell
Thanks for posting the photos. I am not sure I have the ability to fix that long split.
I think I will look for others but will contact you if I am not successful to see if it is still
available.
Thanks,
Bill H.
I think I will look for others but will contact you if I am not successful to see if it is still
available.
Thanks,
Bill H.
-
Allan
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: FS high rad shell
Bill, rather than a split, it is most likely a wear groove due to a poorly fitted hood. These are quite common on brass shells. It can most satisfactorily be fixed by folding a brass strip to lay along the inside of the shell and silver soldering it in place through the wear groove. This will require some skill by the solderer. If the rest of the shell is not beaten up, it is a worthwhile repair job.
Allan from down under.
Allan from down under.
-
fordrelic
Topic author - Posts: 467
- Joined: Sat Jan 12, 2019 11:15 am
- First Name: Clay
- Last Name: Atkins
- * REQUIRED* Type and Year of Model Ts owned: 1921 Roadster
- Location: Sumner, Il 62466
Re: FS high rad shell $100
$100 plus shipping
-
fordrelic
Topic author - Posts: 467
- Joined: Sat Jan 12, 2019 11:15 am
- First Name: Clay
- Last Name: Atkins
- * REQUIRED* Type and Year of Model Ts owned: 1921 Roadster
- Location: Sumner, Il 62466
Re: FS high rad shell $100
$100 plus shipping
-
fordrelic
Topic author - Posts: 467
- Joined: Sat Jan 12, 2019 11:15 am
- First Name: Clay
- Last Name: Atkins
- * REQUIRED* Type and Year of Model Ts owned: 1921 Roadster
- Location: Sumner, Il 62466
Re: FS high rad shell $100
$100 plus shipping approx. $30
-
fordrelic
Topic author - Posts: 467
- Joined: Sat Jan 12, 2019 11:15 am
- First Name: Clay
- Last Name: Atkins
- * REQUIRED* Type and Year of Model Ts owned: 1921 Roadster
- Location: Sumner, Il 62466
Re: FS high rad shell $100
to the top