early fan on a 27 engine
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Waldo
Topic author - Posts: 35
- Joined: Tue Jan 08, 2019 8:30 am
- First Name: Doug
- Last Name: Wilson
- * REQUIRED* Type and Year of Model Ts owned: 21 touring
- Location: Omaha NE
early fan on a 27 engine
I have not run a fan on my car ever. No problems with overheating with a Berg radiator. I have a 27 engine in my 21. However I picked up an earlier fan, that mounts on the engine not the water outlet. has anybody done this and found a way to adjust the fan belt tension, other than to replace the front cover?
-
Mark Gregush
- Posts: 5370
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: early fan on a 27 engine
Would be better if you re-ask your question on the main forum.
If the fan mounting arm is the later straight style, no it really should not matter. The radiators were the same size from 1924 to 1926.
If the fan mounting arm is the later straight style, no it really should not matter. The radiators were the same size from 1924 to 1926.
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup