Looking for the ID of big end of rod BEFORE Babbitt is poured.
Any chance someone has that? What I am measuring is not matching the drawings I got. Thanks Dan
Connecting Rod info
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Kevin Pharis
- Posts: 1600
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: Connecting Rod info
Babbit is typically .040”-.050” radial thickness. So a stock T rod would be about 1.350”
-
Dan Hatch
Topic author - Posts: 5172
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: Connecting Rod info
Thanks that is what I thought, but they held the ford drawing I am not reading right I guess.