Trade: Model T Exhaust Header Plate
-
ModelTWoods
Topic author - Posts: 1421
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
Trade: Model T Exhaust Header Plate
Looking To Trade, one Model T Exhaust Header Plate. This is what you'd start with if you were making your own set of Speedster Headers. Looking to trade for similar plate that is used to mate a Model A or B intake and exhaust manifold to a T block.The T to A adapter plate is presently available from most T vendors. Although it used to be available, the exhaust header plate that I have to trade is not currently in any current catalogs that I have seen. If you are interested in this header plate, contact me by email, as I seldom check the message center on the Forum.
-
speedytinc
- Posts: 4730
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: Trade: Model T Exhaust Header Plate
It is not necessary to use an adapter plate to fit an A or B manifold set.
Its a straight bolt on with minor modification to some of the manifold stud reliefs.
Its a straight bolt on with minor modification to some of the manifold stud reliefs.