Can anyone idenify this device?
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Aussie16
Topic author - Posts: 263
- Joined: Sat Jan 05, 2019 9:24 pm
- First Name: Warwick
- Last Name: Landy
- * REQUIRED* Type and Year of Model Ts owned: 1916 RHD Canadian Touring 1916 Pickup 1926 Fordor 1925 Dalgety Tourer 1916 Speedster
- Location: Trarlagon Victoria Australia
Can anyone idenify this device?
I cam across this device amongst a pile of T parts. Can anyone confirm it is actually off, its manufacturer a T and what is its purpose is. The 3 bolt holes on the drive gear end appear to line up with a T Generator housing? Just curious. Your thoughts please?
- Attachments
-
-
-
George House
- Posts: 2814
- Joined: Sun Jan 06, 2019 5:25 pm
- First Name: George
- Last Name: House
- * REQUIRED* Type and Year of Model Ts owned: ‘10 Maxwell AA, ‘11Hupp Model 20, Two 1914 Ford runabouts, 19 centerdoor, 25 C Cab,26 roadster
- Location: Northern Caldwell County TX
- MTFCA Life Member: YES
- Board Member Since: 1999
Re: Can anyone idenify this device?
Didn’t you ask this and revealed the pictures here just yesterday ?..
.. its still for a Fordson Model F.
.. its still for a Fordson Model F.A Fine is a Tax for Doing Something Wrong….A Tax is a Fine for Doing Something RIGHT
-
Aussie16
Topic author - Posts: 263
- Joined: Sat Jan 05, 2019 9:24 pm
- First Name: Warwick
- Last Name: Landy
- * REQUIRED* Type and Year of Model Ts owned: 1916 RHD Canadian Touring 1916 Pickup 1926 Fordor 1925 Dalgety Tourer 1916 Speedster
- Location: Trarlagon Victoria Australia
Re: Can anyone idenify this device?
George, Thanks for the reply. Yes, a dual post, my apologies. Thanks for your dual answers and interest. Can I delete this post?
-
Dan McEachern
- Posts: 1400
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Can anyone idenify this device?
Were these standard equipment for the Fordson or some sort of aftermarket accessory? Just wondering, as I've had one kicking around for years.
thanks for any info. I don't speak Fordson very well!
thanks for any info. I don't speak Fordson very well!
-
George House
- Posts: 2814
- Joined: Sun Jan 06, 2019 5:25 pm
- First Name: George
- Last Name: House
- * REQUIRED* Type and Year of Model Ts owned: ‘10 Maxwell AA, ‘11Hupp Model 20, Two 1914 Ford runabouts, 19 centerdoor, 25 C Cab,26 roadster
- Location: Northern Caldwell County TX
- MTFCA Life Member: YES
- Board Member Since: 1999
Re: Can anyone idenify this device?
Aftermarket…..it’ll keep the hired hands from going over 6 MPH 
A Fine is a Tax for Doing Something Wrong….A Tax is a Fine for Doing Something RIGHT
-
jiminbartow
- Posts: 2434
- Joined: Sun Jan 06, 2019 10:55 pm
- First Name: James
- Last Name: Patrick
- * REQUIRED* Type and Year of Model Ts owned: 1926 Coupe
- Location: Bartow, FL
- Board Member Since: 2001
Re: Can anyone idenify this device?
No. A post cannot be deleted once it has been responded to.