I need to thread a new commutator rod and not sure what the threads size would be 1/4-20 or 12-24?
Thanks
Fitz
Thread size
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
varmint
- Posts: 838
- Joined: Mon Jan 07, 2019 2:02 pm
- First Name: Vernon
- Last Name: Worley
- * REQUIRED* Type and Year of Model Ts owned: October 26, 1926 Coupe
- Location: New Orleans, LA
- Contact:
Re: Thread size
Mine are smooth, no threads, so I cannot measure them.
The other styles...
are available from the vendors...
if you have a tap and die kit, use the feeler...
be careful of #14 vs 1/4". Use calipers to identify the diameter if you want to do this yourself.
The other styles...
are available from the vendors...
if you have a tap and die kit, use the feeler...
be careful of #14 vs 1/4". Use calipers to identify the diameter if you want to do this yourself.
Vern (Vieux Carre)
-
Kevin Pharis
- Posts: 1559
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
-
Ralph F
Topic author - Posts: 165
- Joined: Wed Jan 09, 2019 7:09 pm
- First Name: Ralph
- Last Name: Fitz-Gerald
- Location: Monkton, Vermont
Re: Thread size
Thanks for the answer.
Fitzy
Fitzy