Hoping someone might have a set of 8 original valve retainers and pins for a model-T.
My engine is a 1926.
Ping me if you would like to sell them.
WTB: Original Valve Retainers and Pins
-
fireheadman
Topic author - Posts: 143
- Joined: Fri Aug 08, 2025 1:26 pm
- First Name: Ben
- Last Name: Piraro
- * REQUIRED* Type and Year of Model Ts owned: 1911 Model-T Pie Wagon
- Location: Castle Rock, CO
WTB: Original Valve Retainers and Pins
Member: Mile High Pedal Pushers - Denver, Colorado Chapter
https://www.youtube.com/watch?v=e5FPWnxG_9w
https://www.youtube.com/watch?v=e5FPWnxG_9w
-
1925 Touring
- Posts: 898
- Joined: Mon Apr 25, 2022 6:23 pm
- First Name: Austin
- Last Name: Farmer
- * REQUIRED* Type and Year of Model Ts owned: 1922 Touring 1924 roadster pickup
- Location: N.W. Illinois
- Contact:
Re: WTB: Original Valve Retainers and Pins
https://www.modeltford.com/item/3057.aspx
https://www.modeltford.com/item/3056.aspx
Lang's sells valve pins and retainers.
https://www.modeltford.com/item/3056.aspx
Lang's sells valve pins and retainers.
Just a 20 year old who listens to 40 year old music, works on 75 year old airplanes and drives 100 year old cars.
The past is only simple because hindsight is 20/20.
The past is only simple because hindsight is 20/20.
-
fireheadman
Topic author - Posts: 143
- Joined: Fri Aug 08, 2025 1:26 pm
- First Name: Ben
- Last Name: Piraro
- * REQUIRED* Type and Year of Model Ts owned: 1911 Model-T Pie Wagon
- Location: Castle Rock, CO
Re: WTB: Original Valve Retainers and Pins
That is my backup plan
Looking for originals first
Thanks for links
Looking for originals first
Thanks for links
Member: Mile High Pedal Pushers - Denver, Colorado Chapter
https://www.youtube.com/watch?v=e5FPWnxG_9w
https://www.youtube.com/watch?v=e5FPWnxG_9w
-
Scott_Conger
- Posts: 6778
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: WTB: Original Valve Retainers and Pins
Try calling Steve at Lang's or the good folks at Chaffin's garage. They both have used parts galore and if they are pulling down an engine now or in the near future I'm sure one of them will be glad to accommodate you.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
fireheadman
Topic author - Posts: 143
- Joined: Fri Aug 08, 2025 1:26 pm
- First Name: Ben
- Last Name: Piraro
- * REQUIRED* Type and Year of Model Ts owned: 1911 Model-T Pie Wagon
- Location: Castle Rock, CO
Re: WTB: Original Valve Retainers and Pins
Spoke with Steve yesterday on this. Will give Chaffins a call.
Steve mentioned there was an issue years ago with quality but have not seen/heard of it in the last 800+ sets they have sold last year. It’s a good back up, just trying my luck for original for a week
Steve mentioned there was an issue years ago with quality but have not seen/heard of it in the last 800+ sets they have sold last year. It’s a good back up, just trying my luck for original for a week
Member: Mile High Pedal Pushers - Denver, Colorado Chapter
https://www.youtube.com/watch?v=e5FPWnxG_9w
https://www.youtube.com/watch?v=e5FPWnxG_9w
-
Dan Hatch
- Posts: 5510
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: WTB: Original Valve Retainers and Pins
Send me an email by the forum. I may have something you will want.
Try and post a picture tomorrow. Dan
Try and post a picture tomorrow. Dan