Old worn dull reflectors -
- reflector.png (622.79 KiB) Viewed 5500 times
Repurposing Model T Parts
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
TRDxB2
Topic author - Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Repurposing Model T Parts
Some pictures are of Model T parts and other contain parts similar to T, so you can get the idea. The idea is to use worn disfunctional parts modified to work the idea. This link has has some really neat ideas http://fordiyers.com/ways-to-repurpose-old-car-parts/
Old worn dull reflectors - could replace rivets with hook eyes for coats, hats , keys etc Could used split rim tool , cam shaft
Old worn dull reflectors - could replace rivets with hook eyes for coats, hats , keys etc Could used split rim tool , cam shaft
- Attachments
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
TRDxB2
Topic author - Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Repurposing Model T Parts
More ideas for them
- plugs.jpg (68.3 KiB) Viewed 5494 times
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
Mark Gregush
- Posts: 5370
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: Repurposing Model T Parts
I have some 26 head lights that was thinking about adding socket and mounting plates to make outside wall lights. They are too far gone to use on cars but have nice patina for rustic look!
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup
-
RajoRacer
- Posts: 5172
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
Re: Repurposing Model T Parts
I utilized some old T running boards for my accessory collection shelves - figured it was a fitting retirement place !
- Attachments
-
-
JohnM
- Posts: 700
- Joined: Sun Mar 24, 2019 8:22 pm
- First Name: John
- Last Name: Michaelree
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring 1927 Tudor
- Location: st louis
- Board Member Since: 2010
Re: Repurposing Model T Parts
Years ago my uncle used old model T driveshafts for horseshoe pegs. 
-
TRDxB2
Topic author - Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Repurposing Model T Parts
And there's more
- Attachments
-
-
-
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
TWrenn
- Posts: 3743
- Joined: Sun Jan 06, 2019 10:53 am
- First Name: Tim
- Last Name: Wrenn
- * REQUIRED* Type and Year of Model Ts owned: '13 Touring, '26 "Overlap" Fordor
- Location: Ohio
- Board Member Since: 2019
Re: Repurposing Model T Parts
Think I like the chandelier the most!
-
DHort
- Posts: 2826
- Joined: Sun Jan 06, 2019 1:30 pm
- First Name: Dave
- Last Name: Hjortnaes
- * REQUIRED* Type and Year of Model Ts owned: 24 Speedster, 20 touring
- Location: Men Falls, WI
Re: Repurposing Model T Parts
the sink on the right. Is that for dipping parts in so they do not rust?
Lot of nice idea's out there. Like
Lot of nice idea's out there. Like
-
CraneJon
- Posts: 93
- Joined: Sun Jan 06, 2019 10:55 am
- First Name: jon
- Last Name: crane
- * REQUIRED* Type and Year of Model Ts owned: 1925 T pickup, 1928 A, 1931 A
- Location: rochester mich
Re: Repurposing Model T Parts
I once heard about a Montana Gunsmith who made damascus shotgun barrels out of Model T rear axles I asked Stan Howe about it and he did not know the gunsmith.
A local cider mill in Michigan has a press made from T Parts.
I have a friend who is making a pumping and operating windmill from T parts. Tower is four rails ot the frame.
Jon
A local cider mill in Michigan has a press made from T Parts.
I have a friend who is making a pumping and operating windmill from T parts. Tower is four rails ot the frame.
Jon
-
Mighty1924
- Posts: 60
- Joined: Wed Jan 16, 2019 10:15 pm
- First Name: Rick
- Last Name: Shaw
- * REQUIRED* Type and Year of Model Ts owned: 1922 Touring. 1924 Coupe
- Location: Sandwich IL
Re: Repurposing Model T Parts
Here is a couple of projects from T Parts
Lots of time last year too make things.
Lots of time last year too make things.
- Attachments
-
-
-
Corey Walker
- Posts: 637
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- * REQUIRED* Type and Year of Model Ts owned: 1914 runabout, 1921 homemade truck, 1921 Speedster
- Location: Brownsboro, TX
- Board Member Since: 2007
Re: Repurposing Model T Parts
I went to help a friend put a 300 straight 6 to power an irrigation pump on this old trailer he had and it was obvious how it’s life began. It has the holes for the early running board brackets. His trailer for a welding machine is a T frame as well.
- Attachments
-
-
Corey Walker, Brownsboro, Texas
-
ThreePedalTapDancer
- Posts: 1631
- Joined: Sun Nov 24, 2019 2:29 pm
- First Name: Ed
- Last Name: Martin
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1909 Touring
- Location: Idaho
Re: Repurposing Model T Parts
- C76B4F63-0D84-41C5-BE1A-ADE4129F7BF7.jpeg (138.09 KiB) Viewed 4869 times
-
TRDxB2
Topic author - Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Repurposing Model T Parts
Forgot I did this. Old axle shaft used as an anvil for peening. Used on break lever cam & slow speed notch
- Attachments
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
Wayne Sheldon
- Posts: 4249
- Joined: Sun Jan 06, 2019 3:13 pm
- First Name: Wayne
- Last Name: Sheldon
- * REQUIRED* Type and Year of Model Ts owned: 1915 Runabout 1913 Speedster
- Location: Grass Valley California, USA
- Board Member Since: 2005
Re: Repurposing Model T Parts
Must be something wrong with me? I keep fixing parts others threw away and using them on my cars.
-
henryford2
- Posts: 811
- Joined: Sun Jan 06, 2019 4:14 pm
- First Name: Joseph
- Last Name: Andulics
- * REQUIRED* Type and Year of Model Ts owned: 1926 Fordor, 1926 Truck, 1927 Roadster GOW, RAJO Sprint car
- Location: North Ridgeville, OH
- Contact:
Re: Repurposing Model T Parts
Some of my work (www.greenfancompany.com) Enjoy
- 7c31c5e0fb4d029dd20c6cf2e30a2d15.jpeg (19.3 KiB) Viewed 4703 times
- 8a8740f02f8bddd2e191d0014b7fc197.jpeg (35.61 KiB) Viewed 4703 times
- f4e1dbf12bc40b934848df70086a83fe.jpeg (36.78 KiB) Viewed 4703 times
-
Dennis Fleming
- Posts: 254
- Joined: Mon Jan 07, 2019 9:09 pm
- First Name: Dennis
- Last Name: Fleming
- * REQUIRED* Type and Year of Model Ts owned: 1913 touring,23 TT Express,23 Center Door,15 Touring,22 Speedster,22Coupe
- Location: Luray
- Board Member Since: 2005
Re: Repurposing Model T Parts
My engine stand
- 5D5A45A7-3895-4869-A650-8D334A3033D3.jpeg (30.74 KiB) Viewed 4576 times
- 2D8E9747-A6DB-4E48-A1D9-A1E4136F9EDC.jpeg (29.71 KiB) Viewed 4576 times
- 302E66AF-FD01-48C8-82E0-9C028DA49752.jpeg (33.1 KiB) Viewed 4576 times
-
TRDxB2
Topic author - Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Repurposing Model T Parts
Chassis engine stand (I didn't do the stand and had to give it back) 
. Tilt front back to roll on wheels
. Tilt front back to roll on wheels- Attachments
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
RustyFords
- Posts: 1559
- Joined: Sun Jan 06, 2019 11:16 am
- First Name: Don
- Last Name: Allen
- * REQUIRED* Type and Year of Model Ts owned: 1924 Touring
- Location: Houston, TX
Re: Repurposing Model T Parts
I'm about to make a cart for a gas welder out of a Model T frame. The frame was butchered in the past and is not suitable to be used for a car.
1924 Touring