I am happy to announce that I just received a Chaffin’s Garage re-ground 270 lift camshaft along with matching cam bearings.
According to Dave, 30 just arrived at the store last week and so now they’re down to 29…. I went back-and-forth between waiting around endlessly for a new Stipe?…. And ended up buying one of these cams from my good friends at Chaffin’s!….. I’ve heard nothing but excellent comments regarding their cams that they slightly advance….. I will purchase a Stipe Cam when they’re finally available, but that’ll be for my next model T….. and I can tell you guys I’ve been bitten bad, so there will be another model T!…lol
Cheers!
Camshaft update!
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Flyingpiper59
Topic author - Posts: 140
- Joined: Wed Jul 20, 2022 6:02 pm
- First Name: Edwin
- Last Name: Douglas
- * REQUIRED* Type and Year of Model Ts owned: 27 Tudor
- Location: Millport, PA
-
speedytinc
- Posts: 4725
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: Camshaft update!
It is a very good performing cam.
Read the instructions.
I think the cam has to be front thrust-ed.
Previous versions required it.
Read the instructions.
I think the cam has to be front thrust-ed.
Previous versions required it.
-
Flyingpiper59
Topic author - Posts: 140
- Joined: Wed Jul 20, 2022 6:02 pm
- First Name: Edwin
- Last Name: Douglas
- * REQUIRED* Type and Year of Model Ts owned: 27 Tudor
- Location: Millport, PA
Re: Camshaft update!
I think they remedied that by cutting the cams to conform to the 26/27 cams….and sell the longer bearing with it
-
Mark Chaffin
- Posts: 4343
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- Board Member Since: 2001
Re: Camshaft update!
That is correct. We recommend the 26/27 cam for regrind and sell only the latest style front cam bearing. We do also offer the earlier style cam but you must also use the thrust pack which is included.
-
speedytinc
- Posts: 4725
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: Camshaft update!
As long as some of the heel is in tact, it will work without needing thrusting.
-
AndyClary
- Posts: 835
- Joined: Sun Jan 06, 2019 11:15 am
- First Name: Andrew
- Last Name: Clary
- * REQUIRED* Type and Year of Model Ts owned: 1914 Runabout 1926 Coupe. Mercury Speedster #1249
- Location: Usa
Re: Camshaft update!
Have run several of the Chaffin 270 cams, excellent touring cam. Have never had an issue with one and would recommend to anyone.
Andy
Andy