Hello,
I am thinking about rebuilding my Ruxtell and I have access to a large drum rear end that I thought I could install while I worked on the other. My car is a 22 with 30 x 3.5 on the rear. Could I simply find and change the hubs on my wheels to large drums and hook everything else up without much trouble or is there more to change before it will work? Thanks and God Bless
Changing to a large drum rear end?
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
colonelpowers
Topic author - Posts: 220
- Joined: Fri Oct 30, 2020 8:04 pm
- First Name: Joshua
- Last Name: Powers
- * REQUIRED* Type and Year of Model Ts owned: 1922 Center Door Sedan
- Location: Marion, Virginia
-
speedytinc
- Posts: 4863
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: Changing to a large drum rear end?
No need to change hubs, they are the same.
Change the brake shoes & drums. You will need the later radius rods, spring perches & parking brake rods.
We're it me, I would build a big drum rux. I know its not correct for you, but you get brakes suitable as a service brake. No need for RM brakes & work backwards.
Change the brake shoes & drums. You will need the later radius rods, spring perches & parking brake rods.
We're it me, I would build a big drum rux. I know its not correct for you, but you get brakes suitable as a service brake. No need for RM brakes & work backwards.