Does anyone know where I can locate an article on engine repair that was written by Milt Webb (I think)? In the article he continually stressed the importance of checking the fit of the 4th main. Also reminded you to scrape off the "goobers" of sealer after assembling two parts together. I used the article before but can't find it now. I used it in conjunction with the "red" book and found it very helpful in certain areas. Anyone know of the article?
Thanks
Jerry
Engine Rebuild Article
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Jerry Young
Topic author - Posts: 81
- Joined: Sun Jan 06, 2019 6:33 pm
- First Name: Jerry M
- Last Name: Young
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring1927
- Location: Burleson, Tx
-
Jerry Young
Topic author - Posts: 81
- Joined: Sun Jan 06, 2019 6:33 pm
- First Name: Jerry M
- Last Name: Young
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring1927
- Location: Burleson, Tx
Re: Engine Rebuild Article
Thanks Jason for the information!
Jerry
Jerry
-
CudaMan
- Posts: 2531
- Joined: Fri Jan 04, 2019 4:17 pm
- First Name: Mark
- Last Name: Strange
- * REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
- Location: Hillsboro, MO
- Board Member Since: 2013
Re: Engine Rebuild Article
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)
Hillsboro, MO
1924 Cut-off Touring (now a pickup)