These are the clamps that bolt to the frame near the radiator.
Thanks
Mike Bird
mikebird@lifeattheridge.net or 574-584-6744
Windshield stay rod clamp bolts
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Tbird
Topic author - Posts: 1230
- Joined: Sun Jan 06, 2019 6:51 pm
- First Name: Mike
- Last Name: Bird
- * REQUIRED* Type and Year of Model Ts owned: 1912 Delivery Car
- Location: Goshen IN
Windshield stay rod clamp bolts
I need to know what bolts and nuts need to be used for the windshield stay rod clamps for a 12.
These are the clamps that bolt to the frame near the radiator.
Thanks
Mike Bird
mikebird@lifeattheridge.net or 574-584-6744
These are the clamps that bolt to the frame near the radiator.
Thanks
Mike Bird
mikebird@lifeattheridge.net or 574-584-6744
-
RajoRacer
- Posts: 5171
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
Re: Windshield stay rod clamp bolts
Doesn't that bolt also retain the fender iron, Mike ?
-
Jack Putnam, in Ohio
- Posts: 457
- Joined: Sun Jan 06, 2019 7:19 pm
- First Name: Jack
- Last Name: Putnam
- Location: Bluffton, Ohio
Re: Windshield stay rod clamp bolts
that little white cap on the end of the rod looks nice, but if the clamp holding the rod allows the rod to slip, the windshield will be in your lap. Best to drill a small hole thru the rod and put a brass cotter pin through the rod. That will limit the travel of the rod.