Fuel Tank Building 102, Part 1

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
Henry K. Lee
Posts: 5474
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
* REQUIRED* Type and Year of Model Ts owned: Many
Location: South Pittsburg, TN
MTFCA Life Member: YES

Fuel Tank Building 102, Part 1

Post by Henry K. Lee » Wed Mar 13, 2019 7:39 pm

Ok, Again I apologize if I over did it on the other 101 thread. So everything will be the same except for the edge work. The key here you must be easy with the heat from welding and pacing yourself. This method will be using a "core" to act as a shunt in controlling heat, but pacing and not over doing it. Sorry for over stressing this but the work can be in vane.

1/16" X 3/4" strap steel on edge, forming on any solid round object does the trick. Clamping it to a flat plate of steel while welding and not removing until cooled.
IMG_1086.jpg
IMG_1087.jpg
IMG_1088.jpg
IMG_1090.jpg
Another excellent method instead of flat stock is using 1/4" or 5/16" round stock. The method works well but welding away from the tin to the round stock will prevent heat build up on the tin.
IMG_1091.jpg
We do not do complete full welds on "tin" but "pearl" welds approximately every inch apart. As the cooling cycles are repeated we connect the pearls. If we add body rolls (beads) we add corrugation which stabilizes the metal. "Tin" is classified as steel sheets below 1/8" by most metal fabricators. Alternating back and forth from one end to the other helps. Let it completely cool before continuing.

I will demonstrate later.

Hope this Helps!

All the Best,

Hank in Tin-A-See


Les Schubert
Posts: 1357
Joined: Thu Jan 10, 2019 5:47 pm
First Name: Les
Last Name: Schubert
* REQUIRED* Type and Year of Model Ts owned: 27 roadster 13 touring
Location: Calgary

Re: Fuel Tank Building 102, Part 1

Post by Les Schubert » Wed Mar 13, 2019 7:54 pm

Hank
Thank You for all the great ideas!!
I’m kind of at the “intermediate level “ when it comes sheet metal fabricating.
I’ve made fenders using the bead roller
Gas tanks using galvanized and soldering
And some miscellaneous brass work
Please keep it coming!!

User avatar

Topic author
Henry K. Lee
Posts: 5474
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
* REQUIRED* Type and Year of Model Ts owned: Many
Location: South Pittsburg, TN
MTFCA Life Member: YES

Re: Fuel Tank Building 102, Part 1

Post by Henry K. Lee » Wed Mar 13, 2019 8:05 pm

Thank You Les!

You are a true Gentleman and as one of the "Great" Model T guys I am humbled by your comments, Again, Thank You!

Will if nothing else only to help you.

All the Best to You and Yours,

Hank


Shane Lach
Posts: 246
Joined: Sun Jan 06, 2019 2:36 pm
First Name: Shane
Last Name: Lach
* REQUIRED* Type and Year of Model Ts owned: 1927 Tudor and 1921 speedster in progress
Location: Milford, NH

Re: Fuel Tank Building 102, Part 1

Post by Shane Lach » Wed Mar 13, 2019 8:50 pm

Looking good Hank. Did the folded ends not work out?

User avatar

Topic author
Henry K. Lee
Posts: 5474
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
* REQUIRED* Type and Year of Model Ts owned: Many
Location: South Pittsburg, TN
MTFCA Life Member: YES

Re: Fuel Tank Building 102, Part 1

Post by Henry K. Lee » Wed Mar 13, 2019 9:47 pm

Shane the tank became to large for the vehicle so Dave and I decided to scale down to the right portions. I think I was getting ahead of what I was trying to teach, 101 is 101. LOL! Will continue to show the other methods with these to assist.

All the Best,

Hank

User avatar

Topic author
Henry K. Lee
Posts: 5474
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
* REQUIRED* Type and Year of Model Ts owned: Many
Location: South Pittsburg, TN
MTFCA Life Member: YES

Re: Fuel Tank Building 102, Part 1

Post by Henry K. Lee » Thu Mar 14, 2019 6:53 pm

Getting a little fancy with an outside fuel gauge with four floating aluminum hollow balls!
IMG_1102.jpg
All the Best,

Hank

Post Reply Previous topicNext topic