This Isn't A Model A Forum, But

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
ModelTWoods
Posts: 1419
Joined: Tue Jan 08, 2019 10:53 am
First Name: Terry
Last Name: Woods
* REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
Location: Cibolo (San Antonio), TX

This Isn't A Model A Forum, But

Post by ModelTWoods » Tue Oct 05, 2021 1:30 pm

I have an opportunity to buy a restored, running, driving 30-31 Model A chassis that a local rodder has "borrowed" the body from. The chassis will even come with nice restored and painted front fenders, running boards, and splash aprons, all for less than the cost of a restored engine and transmission. Its very tempting, but without an original body, I would be forced to make a speedster, huckster, hack, or some homemade body for it, not to mention that I really don't have covered storage for it. Anyone got a suggestion, besides don't bite off more than I can chew??

User avatar

RajoRacer
Posts: 5174
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
Board Member Since: 2001

Re: This Isn't A Model A Forum, But

Post by RajoRacer » Tue Oct 05, 2021 1:37 pm

You might get more information from the "Ford Barn" Model A section.

User avatar

Mark Gregush
Posts: 5370
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
Board Member Since: 1999

Re: This Isn't A Model A Forum, But

Post by Mark Gregush » Tue Oct 05, 2021 1:41 pm

If you are looking for ballpark value, try Fordbarn.com. They have an active A forum. Unless a title comes with it, do you want the hassle of getting one? If they kept the title, any numbers on frame or engine, might now be in use. How much are they asking?
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1948 Ford F2 pickup


Topic author
ModelTWoods
Posts: 1419
Joined: Tue Jan 08, 2019 10:53 am
First Name: Terry
Last Name: Woods
* REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
Location: Cibolo (San Antonio), TX

Re: This Isn't A Model A Forum, But

Post by ModelTWoods » Tue Oct 05, 2021 1:58 pm

Thanks, guys, I'll look on Fordbarn. I just thought some T guy might also own a Model A and have some input. BTW, asking price is $3,000, which is negotiable. As I said. I don't think that I could buy the same unrestored chassis and sheetmetal and restore it for that amount.


speedytinc
Posts: 4729
Joined: Fri Feb 12, 2021 12:24 pm
First Name: john
Last Name: karvaly
* REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
Location: orange, ca
Board Member Since: 2020

Re: This Isn't A Model A Forum, But

Post by speedytinc » Tue Oct 05, 2021 2:47 pm

ModelTWoods wrote:
Tue Oct 05, 2021 1:58 pm
Thanks, guys, I'll look on Fordbarn. I just thought some T guy might also own a Model A and have some input. BTW, asking price is $3,000, which is negotiable. As I said. I don't think that I could buy the same unrestored chassis and sheetmetal and restore it for that amount.
Like any T. What is their interpretation of a restored part X ?


TXGOAT2
Posts: 7391
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
Board Member Since: 2021

Re: This Isn't A Model A Forum, But

Post by TXGOAT2 » Tue Oct 05, 2021 4:10 pm

Check Hemming's Motor News. The extensive Ford parts section usually has an ad for Model A bodies out of Colorado.

User avatar

david_dewey
Posts: 522
Joined: Sun Jan 06, 2019 12:42 pm
First Name: David
Last Name: Dewey
* REQUIRED* Type and Year of Model Ts owned: 1916 touring, 1925 runaboaut, 1926 Tudor
Location: Oroville, CA
Board Member Since: 1999

Re: This Isn't A Model A Forum, But

Post by david_dewey » Tue Oct 05, 2021 4:20 pm

There are lots of Model A bodies around looking for a chassis, so I wouldn't worry about a body. There are minor diffefrences in chassis, but mostly in body mounts and rear bumper mounts.
T'ake care,
David Dewey

User avatar

PDGx
Posts: 239
Joined: Sun Jan 06, 2019 9:12 pm
First Name: Paul
Last Name: Grohsmeyer
* REQUIRED* Type and Year of Model Ts owned: ‘17 TT Holmes Wrecker
Location: Central Florida
Board Member Since: 2007

Re: This Isn't A Model A Forum, But

Post by PDGx » Tue Oct 05, 2021 5:09 pm

Remember most A’s have steel bodies, so a homemade wood huckster, hack or such body, will not fit the vintage.
Last edited by PDGx on Wed Oct 06, 2021 8:32 pm, edited 1 time in total.

User avatar

Michael Peternell
Posts: 692
Joined: Sun Jan 06, 2019 11:00 am
First Name: Michael
Last Name: Peternell
* REQUIRED* Type and Year of Model Ts owned: TT gas truck, T tractor conversions, '15 touring, '17 speedster, '26 16 valve speedster
Location: Albany mn

Re: This Isn't A Model A Forum, But

Post by Michael Peternell » Tue Oct 05, 2021 6:06 pm

PDGx wrote:
Tue Oct 05, 2021 5:09 pm
Remember A’s have steel bodies, so a homemade wood huckster, hack or such body, will not fit the vintage.
Not all. Ford sold a lot of commercial cowled model a chassis that needed bodies built. There were a fair amount of model a school bus`s and I
know Ford didn't build them.
Mike


Dan McEachern
Posts: 1402
Joined: Sun Jan 06, 2019 11:08 am
First Name: DAN
Last Name: MCEACHERN
* REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
Location: ALAMEDA,CA,USA

Re: This Isn't A Model A Forum, But

Post by Dan McEachern » Tue Oct 05, 2021 6:31 pm

You could always put an all steel Brookville body on it and have a nice car.

User avatar

Mark Gregush
Posts: 5370
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
Board Member Since: 1999

Re: This Isn't A Model A Forum, But

Post by Mark Gregush » Tue Oct 05, 2021 6:44 pm

PDGx wrote:
Tue Oct 05, 2021 5:09 pm
Remember A’s have steel bodies, so a homemade wood huckster, hack or such body, will not fit the vintage.
The 4 door bodies had wood sub frames along with wood in the body, not just the top. The cabriolet, victoria/A400 had wood sub frames. The slant windshield 4 doors and cabriolets in 1931 switch to the all steel body, only used wood to attach upholstery. The rest of the Ford line-up was all steel bodies.
There were hucksters/station wagons home built or factory installed on the Model A chassis.
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1948 Ford F2 pickup


Topic author
ModelTWoods
Posts: 1419
Joined: Tue Jan 08, 2019 10:53 am
First Name: Terry
Last Name: Woods
* REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
Location: Cibolo (San Antonio), TX

Re: This Isn't A Model A Forum, But

Post by ModelTWoods » Wed Oct 06, 2021 12:27 am

ModelTWoods wrote:
Tue Oct 05, 2021 1:30 pm
I have an opportunity to buy a restored, running, driving 30-31 Model A chassis that a local rodder has "borrowed" the body from. The chassis will even come with nice restored and painted front fenders, running boards, and splash aprons, all for less than the cost of a restored engine and transmission. Its very tempting, but without an original body, I would be forced to make a speedster, huckster, hack, or some homemade body for it, not to mention that I really don't have covered storage for it. Anyone got a suggestion, besides don't bite off more than I can chew??
I am still contemplating the possibility of this chassis, but now, I have found another option; a 1941 Ford two door sedan with weathered original paint, nice original interior, a 53 Merc engine installed with dual exhaust, an accessory metal sunvisor, rear fender skirts, and a windshield post mounted Unity spotlight, for $6,500.00. An old school hotrod, Decisions, decisions.

I think I've fallen in love with the 41. Yeah, its a two door sedan and not a coupe or convertible, but it is a licensed, driving car that needs nothing but gas and a driver. Besides, there's nothing like a flathead with dual exhausts and Smithy mufflers, talking back to you when you take your foot off the gas petal!
Last edited by ModelTWoods on Wed Oct 06, 2021 1:22 am, edited 2 times in total.


Luke
Posts: 617
Joined: Fri Dec 13, 2019 1:04 am
First Name: Luke
Last Name: P
* REQUIRED* Type and Year of Model Ts owned: 1926
Location: New Zealand

Re: This Isn't A Model A Forum, But

Post by Luke » Wed Oct 06, 2021 12:43 am

Terry,

I've no real idea of U.S. prices for these things, but have a lot of other relevant experience in purchasing motors, and/or parts of thereof :roll:

My view is that if I had an opportunity to purchase a restored mobile chassis complete with motor/box for $3k here in NZ I'd be very keen. As you say it's negotiable naturally one might try to 'improve' the cost, but if you've the room to store it for a while until a suitable body comes along it would seem quite a useful/reasonable project to me.

As I've found out over the years it's generally the ones I didn't purchase that I most regret... with the possible exception of a Peugeot in later years :?

Luke.


J Sundstrom
Posts: 61
Joined: Mon Jan 07, 2019 2:48 pm
First Name: John
Last Name: Sundstrom
* REQUIRED* Type and Year of Model Ts owned: 1920 Touring
Location: Vulcan, MI

Re: This Isn't A Model A Forum, But

Post by J Sundstrom » Wed Oct 06, 2021 11:24 am

Here’s a 1931 Tudor body I saw on Minnesota CL.
John
Attachments
776B2EE3-EC43-4C71-B466-B04128927961.png


Topic author
ModelTWoods
Posts: 1419
Joined: Tue Jan 08, 2019 10:53 am
First Name: Terry
Last Name: Woods
* REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
Location: Cibolo (San Antonio), TX

Re: This Isn't A Model A Forum, But

Post by ModelTWoods » Wed Oct 06, 2021 3:18 pm

J Sundstrom wrote:
Wed Oct 06, 2021 11:24 am
Here’s a 1931 Tudor body I saw on Minnesota CL.
John
Thanks, everyone, for the suggestions on used, as well as new bodies. I know I could also buy a new body from Snyder's. I don't know if Brookville makes their's too, or not, but cost and transportation or freight is a detriment, not to mention the time and labor to finish. I would like to find a home for the A chassis, but the 41 old school rod is a driver and I already have one restoration project in progress and I don't need a second. The 41 will be safer to drive on public streets, highways, and interstates because of its brakes and power. It looks like an old 'moonshiner's' car. It has 'The Gambler' lettered on the rear decklid. I think I'll remove that and replace it with 'White Lightnin' .


Nv Bob
Posts: 799
Joined: Mon Jan 07, 2019 11:04 pm
First Name: Bob
Last Name: Middleton
* REQUIRED* Type and Year of Model Ts owned: 18 roadster 1810 brand X
Location: Western nv

Re: This Isn't A Model A Forum, But

Post by Nv Bob » Wed Oct 06, 2021 3:22 pm

Own both T & A
A speedster to me look odd as they have a high radiator
But make fun cars or hucksters
Running driving chassis I seen go for 3500 or less
Not getting the title be hard in some states

User avatar

Mark Gregush
Posts: 5370
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
Board Member Since: 1999

Re: This Isn't A Model A Forum, But

Post by Mark Gregush » Wed Oct 06, 2021 4:06 pm

A speedster to me look odd as they have a high radiator
That's what I think too, esp when they mount bucket seats a few inches off the floor! Looks like a chopper with monkey handle bars, the ones that are higher than the riders head! :lol:
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1948 Ford F2 pickup

Post Reply Previous topicNext topic