26 t front body to frame mount missing

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic

Topic author
Dave Foley
Posts: 20
Joined: Thu Feb 07, 2019 9:53 am
First Name: David
Last Name: Foley
* REQUIRED* Type and Year of Model Ts owned: 26 touring 26 roadster
Location: Merritt Island Florida

26 t front body to frame mount missing

Post by Dave Foley » Fri Mar 11, 2022 1:43 pm

front body to frame mounts were removed does anyone have replacements or a drawing to fabricate from? Thanks for your help
Attachments
26 front body.JPG
26 roadster front mount.JPG
Top
User avatar

DanTreace
Posts: 3812
Joined: Sun Jan 06, 2019 10:56 am
First Name: Dan
Last Name: Treace
* REQUIRED* Type and Year of Model Ts owned: ‘12 open express,'23 cutoff, '27 touring
Location: North Central FL
Board Member Since: 2000
Contact:
Contact DanTreace

Re: 26 t front body to frame mount missing

Post by DanTreace » Fri Mar 11, 2022 2:07 pm

Haven't a drawing or part replacement, but here is a pic of what that front frame mount looks like.




26-27 front mount .jpg
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Top

Norman Kling
Posts: 4634
Joined: Tue Jan 08, 2019 1:39 pm
First Name: Norman
Last Name: Kling
Location: Alpine California

Re: 26 t front body to frame mount missing

Post by Norman Kling » Fri Mar 11, 2022 5:03 pm

Do you have one on the other side? You might need to make one mirror image of the other. Those are usually ok and attached to the body, so I don't think the vendors have them, but should not be hard to make for someone with the right tools, or possibly remove them from an existing body which is too bad to restore.
Norm
Top

tdump
Posts: 1404
Joined: Sun Jan 06, 2019 7:00 pm
First Name: Mack
Last Name: Cole
* REQUIRED* Type and Year of Model Ts owned: TT. T express pickup,speedster project.
Location: North Carolina

Re: 26 t front body to frame mount missing

Post by tdump » Fri Mar 11, 2022 8:01 pm

I salvaged 1 a few weeks ago when I was making 1 cowl out of parts from about 5. I will go see if I can lay my hands on it and if I can ,just help me out with the shipping.
I found it,it has a cut from the grinder on the side,can be welded up,still very rusty with dirt and the rusty sheet metal still riveted to it.
If you can't help em, don't hinder em'
Top

Topic author
Dave Foley
Posts: 20
Joined: Thu Feb 07, 2019 9:53 am
First Name: David
Last Name: Foley
* REQUIRED* Type and Year of Model Ts owned: 26 touring 26 roadster
Location: Merritt Island Florida

Re: 26 t front body to frame mount missing

Post by Dave Foley » Sat Mar 12, 2022 9:09 am

I do need both sides, the previous owner was going to hot rod it and had removed them, thanks for the picture helps to see what im looking for
Top

Will Brown
Posts: 28
Joined: Sun Jan 06, 2019 11:25 am
First Name: Will
Last Name: Brown
* REQUIRED* Type and Year of Model Ts owned: 26 Runabout
Location: Garrison, New York

Re: 26 t front body to frame mount missing

Post by Will Brown » Sat Mar 12, 2022 3:57 pm

Here is a much-enlarged shot of the brackets in question. The photos are hampered by a metal channel used to support the body when it was on the rotisserie. The metal channel is marked by the red arrow.
Attachments
Right Body bracket.jpg
left Body bracket.jpg
Top
User avatar

TRDxB2
Posts: 6260
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
* REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
Location: Moline IL
Board Member Since: 2018

Re: 26 t front body to frame mount missing

Post by TRDxB2 » Sun Mar 13, 2022 1:52 pm

??????? Looks like electrical metal channel ??? It comes in many sizes
Attachments
chann.png
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Top

Scott_Conger
Posts: 6523
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: 1919
Location: not near anywhere, WY
Board Member Since: 2005

Re: 26 t front body to frame mount missing

Post by Scott_Conger » Sun Mar 13, 2022 1:56 pm

reread Will's post, Frank
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Top
User avatar

TRDxB2
Posts: 6260
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
* REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
Location: Moline IL
Board Member Since: 2018

Re: 26 t front body to frame mount missing

Post by TRDxB2 » Sun Mar 13, 2022 2:22 pm

Dave Foley wrote: ↑
Fri Mar 11, 2022 1:43 pm
 front body to frame mounts were removed does anyone have replacements or a drawing to fabricate from? Thanks for your help
Are these what you need - recently listed on eBay so Hurry - seller is a good guy will take a reasonable offer - From Canada
https://www.ebay.com/itm/284699164209?h ... 8A&vxp=mtr
Attachments
bbb.png
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Top

Scott_Conger
Posts: 6523
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: 1919
Location: not near anywhere, WY
Board Member Since: 2005

Re: 26 t front body to frame mount missing

Post by Scott_Conger » Sun Mar 13, 2022 4:20 pm

and there they are, on a silver platter
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”