I recently acquired a Canadian chassis for parts. Thus far I have found the front axel, engine block, head and transmission hogs head. I am passing on some of the Made in Canada parts to a fellow member.
What parts have Canadian markings?
Thanks!
Matt
What parts of a 1926-27 T are marked Canadian?
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Matt in California
Topic author - Posts: 774
- Joined: Sun Jan 06, 2019 5:42 pm
- First Name: Matt
- Last Name: G
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring, 1926 Fordor Project, TT C-cab flatbed farm field find, TT dump truck project
- Location: California
-
Norman Kling
- Posts: 4634
- Joined: Tue Jan 08, 2019 1:39 pm
- First Name: Norman
- Last Name: Kling
- Location: Alpine California
Re: What parts of a 1926-27 T are marked Canadian?
I have seen it on the radiator shell.
Norm
Norm
-
Jerry VanOoteghem
- Posts: 4082
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
Re: What parts of a 1926-27 T are marked Canadian?
Intake & exhaust manifolds.
-
Altair
- Posts: 365
- Joined: Thu Jan 17, 2019 11:52 am
- First Name: David
- Last Name: Menzies
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring and 1915 Touring both Canadian models
- Location: British Columbia
- Board Member Since: 2012
Re: What parts of a 1926-27 T are marked Canadian?
It is also on the Canadian Top Bow Saddles and connecting rods.
-
Matt in California
Topic author - Posts: 774
- Joined: Sun Jan 06, 2019 5:42 pm
- First Name: Matt
- Last Name: G
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring, 1926 Fordor Project, TT C-cab flatbed farm field find, TT dump truck project
- Location: California
Re: What parts of a 1926-27 T are marked Canadian?
How about rear axle?
Was every part made in Canada? And just some are clearly marked?
Was every part made in Canada? And just some are clearly marked?
-
RajoRacer
- Posts: 5172
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
Re: What parts of a 1926-27 T are marked Canadian?
Front hubs also had "Made In Canada".
-
Allan
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: What parts of a 1926-27 T are marked Canadian?
Kelsey wheel felloes and rims will also be stamped Windsor Ont. The list goes on. The reason was to facilitate exports to British Empire countries. Canada being part of the empire meant that these cars when imported into Australia, New Zealand etc did so at favourable rates of duty. Ford, Canada was set up for precisely this purpose.
Allan from down under.
Allan from down under.
-
DJPeterson
- Posts: 59
- Joined: Sun Jan 06, 2019 11:09 pm
- First Name: Dale
- Last Name: Peterson
- * REQUIRED* Type and Year of Model Ts owned: 1915 Touring, 1916 Roadster, 1925 Roadster PU, 1926 Canadian Fordor, 1927 Speedster
- Location: College Place, WA
Re: What parts of a 1926-27 T are marked Canadian?
Radiator shell
Head
Block
Running boards
Door hinges on my 26 Fordor are stamped "Stanley made in Canada"
+
Head
Block
Running boards
Door hinges on my 26 Fordor are stamped "Stanley made in Canada"
+