What are you bringing to LURAY? May 13 $ 14, 2022

[James_Lyons-WV]

Luray is only four weeks away! Please use this post to tell us what you are bringing to sell...or, equally as important, what are you looking for?
See you in May, at Luray!

[Bryant]

A pile of cash !
Looking for a higher compression head
21”de mountable rim or 2
Bosch distributor plate or cross drive magneto set up. Really anything and everything! Provided everything goes accordingly and I make it, this will be my first pre-war swap meet. Hopefully we get some good weather

[tdump]

I think i will follow Bryant around since he will have the pile of cash!
I will bring a list of things I hope to compile in the coming days.
IS the group that puts on the meet going to do the bring a couple items to sell thing again? I may bring a couple things to help pay for the trip.

[Bryant]

HAHA i will be the 6'9" 400 lb guy carrying around engine blocks

[Dan Hatch]

Trailer load of stuff. I can bring a pile of mag coil cores if anyone is interested. Email me. Not bringing unless they are serious. Thanks Dan.

[Racer_22]

A trailer load of goodies, a restored and running 23-25 chassis very nice shape with new tires. My high compression heads, high volume outside oil lines
Lots of stuff.

[Dave S]

A few things so far - '09-'12 aluminum hood new in box (now $355 at Snyders plus s/h) $300; '26-'27 roadster top irons with wood bows installed $450; 1916 Roadster taillight bracket $75; pair 1926 headlights on bar $90; some '60's and early Vintage Ford magazines. More after I start packing.

[James_Lyons-WV]

Mack Cole... We will not be offering the "Manned Vendor booth" this year. However, if it is of continued interest, show-goers can let us know and we can certainly add it back in the future.

[MKossor]

E-Timer, I-Timer and ECCT coil testers. Will introduce the new Heinze coil Edition of the ECCT. Specifically designed for the earlier Heinze coils. Stop by and say hello.

[tom_strickling]

Does anyone need a nice TT frame ?

I can bring it to Luray

[tdump]

James,thanks for the response, a while back I bought a couple 16 fenders and turns out I can't use them, so I was hoping to forward them on to someone else when i came up there thru your booth.
I enjoyed my trip up there a few years ago and looking forward to coming back.
6-9 and carrying engine blocks.
I am 5-11 and can carry 2 engine blocks!



aluminum briggs and stratton blocks that is!

[RichJ]

I have a clean, complete 1914 engine, in very good, usable-as-is condition. It has .030 aluminum pistons, and it has been in storage over 30 years. I am not bringing it unless someone is interested. I also have a 1923 engine, disassembled, all machining done, with a matching-number California title. I
will also have some really nice transmission drums and some Ruckstell parts.
I also have original 1914 Touring rust free rear doors with near perfect wood.
I have an NOS 1914 aluminum hood (it's at least 60 years old) near perfect
I also have a counterbalanced Shur Mike crankshaft.
I have a set of 21-inch very clean wheels with new 40-plus-year-old tires, also have the hubs.
I am looking for four 30 x 3 1/2 wheels with good tires. Possibly someone wants to swap for my 21-inch wire wheels.
I'll put some posts in the parts listings.
Don't hesitate to call for more information: 561-262-0393

4/22/22: The hood is spoken for.

[RichJ]

Picture of hood and accessory brass mirror.

[RichJ]

Here are a couple of pictures of the counterbalanced crankshaft:

[Terry_007]

I'll be bringing a rather eclectic selection of brass age items - some lamps, clocks, gas lamp burners, some nice "Hershey-type" automobilia, some assorted early lit and some misc periodicals. It you collect automobilia, stop by and visit. I'll also have an assortment of early spark plugs from a collection I recently acquired. If you have any unusual early plugs to sell let me know and I'll catch up with you there. Getting anxious for another great weekend at Luray!
Terry

[sweet23]

I will have the F-150 loaded with goodies. I will have some wheels, Ford tools, spark plugs, cheap fenders & running boards, other T related parts.

[TFowler]

Looking for a decent set of 4 window riser crank handles and escutcheon plates.
2 - A12 radiator hose clamps

[Terry_007]

I will have the F-150 loaded with goodies. I will have some wheels, Ford tools, spark plugs, cheap fenders & running boards, other T related parts.

Tell me more about the spark plugs- what brands and age? Thanks, Terry

[sweet23]

Terry, the plugs are old Champions

[Dave S]

I will bring this thread back up to the top. I'll be bringing '26-'27 roadster top irons with wood bows installed $450; 1916 Roadster taillight bracket $75; pair 1926 headlights on bar $90; some '60's and early Vintage Ford magazines, nice, restored Gray and Davis tail lamp for larger brass cars (Model 17) $450.

Also if there is any interest, I will put the following on our truck: over 30 sets of main bearing caps and associated bolts; a rebuilt 1913 T short block #297,998 casting date 6/12/13, bored .40 over with aluminum pistons, repoured rods and main caps, new valves with a good low head, includes timing cover and side covers. Based on age and quality, I think the engine is worth $3000.

[J1MGOLDEN]

I have a few totally rebuilt engine blocks for sale.

No trade in required.

This is a pre-rebuild photo.

Clean Engine Blocks.JPG (60.37 KiB) Viewed 8090 times

[Jim Suter Virginia]

I am still loading the trailer and will bring:

* 15' Block, casting date 5/11/15 (spoken for at this time)
* 16' Block, casting date 3/14/16
* 15' Rear Axle Housings
* Vintage Ford Magazines, mainly 1960's through 1990's
* Fairbanks Morse, Model 40B, Sheffield, Two Cylinder. Opposed, Air Cooled Engine with Zero Magneto and Carb. Missing the flywheel, however have
extra pistons/rods, cylinders, heads and a two cylinder Zero Magneto.
* Also will bring a general assortment of Model T Parts

I will bring the following, only if someone is seriously interested.
TT Rear Axle with hubs, brake drums, drive shaft tube (damaged) and shackles.
Contact me @ my e-mail: jimsuter40@concast.net
Thanks for looking.

[DanTreace]

ENGINE SOLD. Thanks MTFCA

up and want to know if anyone is interested in a 1927 complete engine, running. New trans drums, all rebuilt, block, pistons, Stipe cam, lots of miles on it, but still was running good. Must move...Asking $2500 ..Let's Make A $Deal!

Don't want to load unless someone is looking for one. Call me..... Nine04-6ONE6-43Six2

Also good cleaned ready to use 3 dip pan. '25 earlier pressed steel running. board braces, lots of little stuff, no early brass parts except pair of new 1912 running boards.

Dan Treace

[Howard Tomlinson]

Hello Everyone,

I will be bringing a mixture of parts including a 26-27 Turtledeck (no lid), late 27 X-rods and tin can pistons, 26-27 headlamps and bar, front 21" wheels, mid-year steering columns, Stromberg OF and MB-3 carbs, Heinze coil box with coils, rear lowering brackets for a speedster, etc. plus more.

Also, I will have information on a 1912 Touring, 1927 Roadster pickup, (1922?) Roadster and a 1931 Model A Vicky for sale.

Thank you,
Howard Tomlinson

[RajoRacer]

Howard - I have a friend here in Washington State seeking rear lowering brackets - any chance of getting a photo ? I'll send you a p.m.

[TBones12]

I will not be able to fit all that I have. But I will post here what MIGHT go.
2 rebuilt wheels
4 used wheels
1912 Torpedo Roadster gas tank and rear deck tool box
Two piece drive shaft (might not be good??)
1912 Running board, new repo (only the right side)
Brass round mirror
Brass horn
3 aluminum heads with pedals
One engine block, mid teens??
1912 brass carburetor
early used brass radiator - needs sides, bottom apron and front side.
engine splash aprons
later fan on pully - very good condition
drive shaft - new
rear axles - new
water pump
couple magnetos, appear like good cores??
Transmission parts
exhaust whistle horn, unpolished copper, looks slightly different than in Lang's catalogue, looks original.
new rear touring 1912 seat springs - but kinda bent up from me having difficulty trying to put leather on it!
Misc small parts

[TBones12]

Original brass upper windshield, with glass - 1912-1913-1914?? has Rand Corporation tag riveted to top
Steel bottom windshield - not sure if Model T. With glass.
set of brass glass channels
side light brackets, steel
silence plate holder - steel
1912 muffler parts

I don't want to give this stuff away, but I don't want to go home with anything either. Reasonable offers are considered.

[Jeepbone1]

We’ve decided to sell our service station HCCT. I’ll be setup in the back left corner.

Brad

[TBones12]

Rain gear! Lord, please don't let it rain on our swap meet in Luray VA., this Thursday, Friday and Gettysburg PA., on Sunday! In your name amen.

[DontKnowMuch]

I am looking for 1914 side lights and tail lights - particularly John Brown and Victor. I am also interested in parts for these lights - glass doors, red lens, etc. Let me know if you have any of these for sale.

Thanks

[J1MGOLDEN]

I have some of each and a rare 1914 rear light!

I also have three rebuild short blocks, with no exchange required.

[Dennis Fleming]

I will be bringing a real nice teacup long nose 13/14 engine pan that is pan jig straight. A complete early 12 rivet rear end with two piece driveshaft and early cast end radius rods. 2 good used 13/14 radiators that would get a little warm on a long pull. Both hold water. Numerous other small items.

[Dropacent]

Anyone traveling to Luray with a nice pair of older Firestone Tires, I will pay a premium and also have someone available to grab for me there. I’d like a pair ,10+ years old, oversized a plus, but flexible. Never used and well stored or very very nice used might be ok. I’ll pay new tire price plus your shipping, let me know. Someone has a couple squirreled away, let them go, get $$$ tmorsher@icloud.com to reach me, thanks!

[Rick_Rice]

Jim Golden,
This is Rick Rice. I sent you an email, as I am very interested in your 1914 tail light! I will be at Luray on Thursday and Friday, so please text me your cell phone number and I will ring you Thursday. Thanks in advance for your reply back!

Kind Regards,
Rick Rice...CELL (330)714-8151

[tdump]

I hope those thunder storms find somewhere else to make noise and sparks for awhile friday!

[tdump]

I brought myself up here! I made it to Days Inn,i will be there after a breakfast in the morning.