Width of Felt Channel for Door Glass
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
BLB27
Topic author - Posts: 892
- Joined: Thu Jul 23, 2020 9:28 pm
- First Name: Bruce
- Last Name: Brakke
- * REQUIRED* Type and Year of Model Ts owned: 1927 coupe
- Location: Ames, Iowa
Width of Felt Channel for Door Glass
Are there two sizes of repop felt channels for door glass?? My repop is 5/8" wide. The width of the "channel" into which the felt channel sets is 9/16". I think it will be very difficult, if not impossible, to install the repop.
-
BLB27
Topic author - Posts: 892
- Joined: Thu Jul 23, 2020 9:28 pm
- First Name: Bruce
- Last Name: Brakke
- * REQUIRED* Type and Year of Model Ts owned: 1927 coupe
- Location: Ames, Iowa
Re: Width of Felt Channel for Door Glass
I was wrong. My retaining channels, for the felt channel, are 5/8". The repop felt channel is 5/8", and therefore, it is very tight fit. I which the repops were 9/16". It would make installation easier. The supplier has told me 9/16 are not available.
Is an adhesive used to bond the felt channel to retainer?
Is an adhesive used to bond the felt channel to retainer?