Radiator drain

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic

Topic author
Mustang1964s
Posts: 268
Joined: Sun Jan 06, 2019 10:48 pm
First Name: Steve
Last Name: Bourgeois
* REQUIRED* Type and Year of Model Ts owned: 1914, 1926
Location: Waco, TX
Board Member Since: 2007

Radiator drain

Post by Mustang1964s » Thu Dec 29, 2022 12:08 pm

Well, the Rad drain only stops dripping when enough rust has built up.
Having drain the T for the winter, I pulled the drain.
This is what came off. Now I need to know what the thread size that I should use for the new one.
RAD Drain.jpg
Does not look good. Just hope I can get a new one with good threads.
Top
User avatar

RajoRacer
Posts: 5172
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
Board Member Since: 2001

Re: Radiator drain

Post by RajoRacer » Thu Dec 29, 2022 12:13 pm

Original was 1/8" pipe.
Top
User avatar

Humblej
Posts: 1957
Joined: Sun Jan 06, 2019 12:23 pm
First Name: Jeff
Last Name: Humble
* REQUIRED* Type and Year of Model Ts owned: 1926 Canadian coupe, 1924 TT C-cab, 1924 runabout
Location: Charlevoix, Mi
Board Member Since: 2006

Re: Radiator drain

Post by Humblej » Thu Dec 29, 2022 1:14 pm

Same drain as the oil pan, easy to find.
Top
User avatar

Rich Eagle
Posts: 6895
Joined: Fri Jan 04, 2019 10:51 am
First Name: Richard
Last Name: Eagle
* REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
Location: Idaho Falls, ID

Re: Radiator drain

Post by Rich Eagle » Thu Dec 29, 2022 1:16 pm

Running a thread die down it might save it. Or even a little silver solder first.
"Just sayin".
When did I do that?
Top

Topic author
Mustang1964s
Posts: 268
Joined: Sun Jan 06, 2019 10:48 pm
First Name: Steve
Last Name: Bourgeois
* REQUIRED* Type and Year of Model Ts owned: 1914, 1926
Location: Waco, TX
Board Member Since: 2007

Re: Radiator drain

Post by Mustang1964s » Thu Dec 29, 2022 1:40 pm

I need one that does not leak.
Unless there is a way that to rebuild this one, so it does not leak.
Top
User avatar

RajoRacer
Posts: 5172
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
Board Member Since: 2001

Re: Radiator drain

Post by RajoRacer » Thu Dec 29, 2022 1:50 pm

Lang's carries an excellent original style petcock - https://www.modeltford.com/item/3079.aspx
Top

speedytinc
Posts: 4725
Joined: Fri Feb 12, 2021 12:24 pm
First Name: john
Last Name: karvaly
* REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
Location: orange, ca
Board Member Since: 2020

Re: Radiator drain

Post by speedytinc » Thu Dec 29, 2022 1:55 pm

Mustang1964s wrote: ↑
Thu Dec 29, 2022 1:40 pm
 I need one that does not leak.
Unless there is a way that to rebuild this one, so it does not leak.
Take it apart & lap with tooth paste.
Top

Jerry VanOoteghem
Posts: 4082
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan

Re: Radiator drain

Post by Jerry VanOoteghem » Thu Dec 29, 2022 2:35 pm

If it were the original style it might be fun to repair it, but it's not, so I would just replace it the new one from Lang's.
Top

Topic author
Mustang1964s
Posts: 268
Joined: Sun Jan 06, 2019 10:48 pm
First Name: Steve
Last Name: Bourgeois
* REQUIRED* Type and Year of Model Ts owned: 1914, 1926
Location: Waco, TX
Board Member Since: 2007

Re: Radiator drain

Post by Mustang1964s » Thu Dec 29, 2022 3:47 pm

That's what I am thinking.
Get a new one and run a tap thru the threads.
Keep fingers crossed that the rad is not messed up.
Top

Allan
Posts: 6609
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Radiator drain

Post by Allan » Thu Dec 29, 2022 5:36 pm

That tap looks more like a carburetor drain cock. The pan oil taps are the same as the radiator drain cock, as others have indicated. I would run a tap in the radiator outlet before fitting any replacement. Something has damaged the thread on your draincock and it may be a damaged thread in the outlet.
.
Allan from down under.
Top
User avatar

Steve Jelf
Posts: 7237
Joined: Fri Jan 04, 2019 9:37 pm
First Name: Steve
Last Name: Jelf
* REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
Location: Parkerfield, Kansas
Board Member Since: 2007
Contact:
Contact Steve Jelf

Re: Radiator drain

Post by Steve Jelf » Thu Dec 29, 2022 10:56 pm

If you clean up the hole threads with a tap, don't overdo it. You only want to clean up the threads, not cut any new ones.
The inevitable often happens.
1915 Runabout
1923 Touring
Top
User avatar

George House
Posts: 2814
Joined: Sun Jan 06, 2019 5:25 pm
First Name: George
Last Name: House
* REQUIRED* Type and Year of Model Ts owned: ‘10 Maxwell AA, ‘11Hupp Model 20, Two 1914 Ford runabouts, 19 centerdoor, 25 C Cab,26 roadster
Location: Northern Caldwell County TX
MTFCA Life Member: YES
Board Member Since: 1999

Re: Radiator drain

Post by George House » Fri Dec 30, 2022 7:48 am

and wrap the threads of your new petcock with that plumbers white Teflon tape.
A Fine is a Tax for Doing Something Wrong….A Tax is a Fine for Doing Something RIGHT 🤔
Top

Topic author
Mustang1964s
Posts: 268
Joined: Sun Jan 06, 2019 10:48 pm
First Name: Steve
Last Name: Bourgeois
* REQUIRED* Type and Year of Model Ts owned: 1914, 1926
Location: Waco, TX
Board Member Since: 2007

Re: Radiator drain

Post by Mustang1964s » Fri Dec 30, 2022 9:26 pm

Found a couple from an old oil pan.
80D7B839-3413-4375-B05E-E04ECC0AC291.jpeg
I soaked them in WD40. They seem to move well.
Tomorrow I will check the rad.
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”