Need Intake & Exhaust Valves for a Rajo BBR Head

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic
User avatar

Topic author
BE_ZERO_BE
Posts: 628
Joined: Sun Jan 06, 2019 12:27 pm
First Name: BOB
Last Name: CASCISA
* REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
Location: POULSBO, WA

Need Intake & Exhaust Valves for a Rajo BBR Head

Post by BE_ZERO_BE » Mon Jan 16, 2023 7:30 pm

I need a source for valves for a Rajo BBR head.
The intake is a 2" diameter head, 5.375" Length.
The Exhaust is a 1.775" head and same length.

Thanks

Anyone know where to get them?
Respectfully Submitted,
Be_Zero_Be

I drive a Model T ... Microseconds don't matter :D

For every Absolute Model T Fact there are at least three exceptions.
Top

Kevin Pharis
Posts: 1565
Joined: Thu Jan 10, 2019 3:54 pm
First Name: Kevin
Last Name: Pharis
Location: Sacramento CA
Contact:
Contact Kevin Pharis

Re: Need Intake & Exhaust Valves for a Rajo BBR Head

Post by Kevin Pharis » Mon Jan 16, 2023 7:56 pm

Check into Manley Valve. They have a custom order department that can deliver near anything you need
Top
User avatar

Topic author
BE_ZERO_BE
Posts: 628
Joined: Sun Jan 06, 2019 12:27 pm
First Name: BOB
Last Name: CASCISA
* REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
Location: POULSBO, WA

Re: Need Intake & Exhaust Valves for a Rajo BBR Head

Post by BE_ZERO_BE » Mon Jan 16, 2023 8:52 pm

Thanks Kevin. I'll give them a try.
Respectfully Submitted,
Be_Zero_Be

I drive a Model T ... Microseconds don't matter :D

For every Absolute Model T Fact there are at least three exceptions.
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”