What material is the packing on the 26/27 fuel shutoff valve …The vendor was out ,,I guess I could look at others …
If it’s leather I have scraps I can cutout a new one ….
I’m using a small valve ,,into a glass bowl filter now…I want it to look more like a mechanic worked on it not a plumber ;0)….
Thanks in advance….
Fuel Sediment/Shutoff Valve Packing..
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
TXGOAT2
- Posts: 7391
- Joined: Sun Feb 14, 2021 10:08 pm
- First Name: Pat
- Last Name: McNallen
- * REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
- Location: Graham, Texas
- Board Member Since: 2021
Re: Fuel Sediment/Shutoff Valve Packing..
Leather would probably work well.
-
speedytinc
- Posts: 4725
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: Fuel Sediment/Shutoff Valve Packing..
Packing is a graphite impregnated cord. Used in water pumps & faucets. Today teflon impregnated cord is available in plumbing stores. Not sure how it stands up to fuel. I have been using packing off a period roll.
-
Craig Leach
- Posts: 1906
- Joined: Tue Jan 08, 2019 12:22 am
- First Name: craig
- Last Name: leach
- * REQUIRED* Type and Year of Model Ts owned: 1919 Firetruck/1922 Speedster
- Location: Laveen Az
Re: Fuel Sediment/Shutoff Valve Packing..
If you find the larger hemp & graphite packing you can unbraid it and twist the strands together to make any size you need same can be done
with the Teflon if you can't find it small enough. In a pinch I have spun up some teflon tape into a cord to seal a leaky carb bowl just a thought.
Craig.
with the Teflon if you can't find it small enough. In a pinch I have spun up some teflon tape into a cord to seal a leaky carb bowl just a thought.
Craig.
-
Carl
Topic author - Posts: 22
- Joined: Sun Jan 06, 2019 12:37 pm
- First Name: Carl
- Last Name: Sorenson
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring
- Location: Montrose CO.
Re: Fuel Sediment/Shutoff Valve Packing..
Thanks Guys ….
I wasn’t sure if Teflon would be good with gasoline ….
I’ll let y’all know how it works out …
I wasn’t sure if Teflon would be good with gasoline ….
I’ll let y’all know how it works out …