FJ - Young Man Needs Model TT Parts In Las Vegas, NV - Anyone Along My Route Wanna Help Out ?

Post by **FreighTer Jim** » Wed May 03, 2023 3:29 pm

Ron Custer sent out the bat signal …

This is my route leaving
Howard, Kansas on April 4th …

I will transport Donated Parts for free …

: IMG_5539.jpeg (33.44 KiB) Viewed 2914 times

FJ
260-804-6695

Scott_Conger · Post by **Scott_Conger** » Wed May 03, 2023 3:57 pm

Bravo, Jim

hopefully someone will be able and willing to help out. Very nice of you to do this.

Post by **RVA23T** » Wed May 03, 2023 4:11 pm

I have 26-27 HH he can have but it is here in central VA and it will need to have his pedals and ramps moved over to it.
I can get it to Luray next Friday if someone is heading back to where you will be able to pick it up from whatever creativity we come up with.

Post by **DHort** » Wed May 03, 2023 4:42 pm

Richard

He does not want a 26-27 hh

He is looking for a 19-25 hh

Post by **RVA23T** » Wed May 03, 2023 4:46 pm

Reading is a great thing, I got that backwards, sorry for the false hope.
Good luck!

Jacob Mangold · Post by **Jacob Mangold** » Wed May 03, 2023 11:00 pm

Thank you for helping me out Jim! It’s much appreciated.

Post by **FreighTer Jim** » Wed May 03, 2023 11:29 pm

Jacob Mangold wrote: ↑
Wed May 03, 2023 11:00 pm
Thank you for helping me out Jim! It’s much appreciated.

Anytime Jacob

You are the present & the future
of The Model T Hobby

Ron Custer wants to introduce you
to Carson - on this trip to Las Vegas
I hope to do a video interview with him
and (hopefully) his Mom.

Perhaps if is OK with your Folks
I can interview you as well ….

Please post a few images of the TT
here on this thread and let
The Model T Family know what
exactly it is that you need
so We can lend a hand ….

FJ

Jacob Mangold · Post by **Jacob Mangold** » Wed May 03, 2023 11:55 pm

When I first got it.

Getting her running.

Jacob Mangold · Post by **Jacob Mangold** » Wed May 03, 2023 11:59 pm

26-27 HH
My truck is actually a 1926 with a 1923 block. What I think happened was that the original block went bad and got replaced but the 26 pan and HH were kept because I have the 4 dip pan as well.

Jacob Mangold · Post by **Jacob Mangold** » Thu May 04, 2023 12:02 am

FreighTer Jim wrote: ↑
Wed May 03, 2023 11:29 pm

Jacob Mangold wrote: ↑
Wed May 03, 2023 11:00 pm
Thank you for helping me out Jim! It’s much appreciated.
Anytime Jacob

You are the present & the future
of The Model T Hobby

Ron Custer wants to introduce you
to Carson - on this trip to Las Vegas
I hope to do a video interview with him
and (hopefully) his Mom.

Perhaps if is OK with your Folks
I can interview you as well ….

Please post a few images of the TT
here on this thread and let
The Model T Family know what
exactly it is that you need
so We can lend a hand ….

FJ

Thank you Jim. And yes, it will most likely be ok if you interview me about my truck. Also, all I really need is the Hogshead, rear spokes and all tires and she should be ready for the road.

Jacob Mangold · Post by **Jacob Mangold** » Thu May 04, 2023 12:12 am

Also, here is my YouTube with TT content & more to come.:https://youtube.com/@jacobmangold

Post by **FreighTer Jim** » Thu May 04, 2023 1:05 pm

I am leaving Howard Kansas for Texas
around 2 PM local time.

FJ
260-804-6695

Post by **George House** » Thu May 04, 2023 6:29 pm

Where in Texas Jim ? I might be able to help.

Post by **FreighTer Jim** » Thu May 04, 2023 8:11 pm

Please read the first post in this topic
to see what my route is

FJ

Post by **JTT3** » Thu May 04, 2023 10:29 pm

Or you could just say Denton, Tx., then west.

Post by **FreighTer Jim** » Sat May 06, 2023 11:15 am

Leaving Denton, Texas
tomorrow around 4 pm local time.

FJ

MTFCA Forum