Spring shackles

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic

Topic author
Mel King
Posts: 96
Joined: Thu Jan 10, 2019 12:23 pm
First Name: Melvin
Last Name: King
Location: Portsmouth VA

Spring shackles

Post by Mel King » Mon May 13, 2019 1:38 pm

I have shackles off of a 15 and I went to several machine shops to get them built up and they said they could not do it . What do you suggest, buy new ones ? :?: MEL.
Top
User avatar

CudaMan
Posts: 2531
Joined: Fri Jan 04, 2019 4:17 pm
First Name: Mark
Last Name: Strange
* REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
Location: Hillsboro, MO
Board Member Since: 2013

Re: Spring shackles

Post by CudaMan » Mon May 13, 2019 2:28 pm

Take a welding and machine shop course at a local junior college, and do them yourself like Steve Jelf did.

Steve, I couldn't find your article(s) on how you did your shackles, can you post a link?
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)
Top
User avatar

CudaMan
Posts: 2531
Joined: Fri Jan 04, 2019 4:17 pm
First Name: Mark
Last Name: Strange
* REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
Location: Hillsboro, MO
Board Member Since: 2013

Re: Spring shackles

Post by CudaMan » Mon May 13, 2019 2:51 pm

Turns out Steve's shackle repair article is in the Vintage Ford magazine, Volume 49, Number 4, page 30. :)
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)
Top

Topic author
Mel King
Posts: 96
Joined: Thu Jan 10, 2019 12:23 pm
First Name: Melvin
Last Name: King
Location: Portsmouth VA

Re: Spring shackles

Post by Mel King » Mon May 13, 2019 5:22 pm

That is just it ,no one will let me use there machines even though I have the experience so I have to find someone that will do it for me cause I do not have the machines. MEL
Top

Allan
Posts: 6609
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Spring shackles

Post by Allan » Mon May 13, 2019 8:14 pm

Mel, new shackles for a 1915 are available and they are of excellent quality. I seriously doubt anyone woulld build them up and re-machine them for less than the cost of new ones.
The only time I have ever re-built shackles is on the L type with no oilers, as these are not reproduced.

Allan from down under.
Top
User avatar

RustyFords
Posts: 1559
Joined: Sun Jan 06, 2019 11:16 am
First Name: Don
Last Name: Allen
* REQUIRED* Type and Year of Model Ts owned: 1924 Touring
Location: Houston, TX

Re: Spring shackles

Post by RustyFords » Mon May 13, 2019 8:32 pm

I bought new shackles, front and back, and installed new bushings in them.

I found them to be high quality and would recommend them.

Plus, there are 7 year old girls who weld better than me...so there's that.
1924 Touring
Top
User avatar

Steve Jelf
Posts: 7237
Joined: Fri Jan 04, 2019 9:37 pm
First Name: Steve
Last Name: Jelf
* REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
Location: Parkerfield, Kansas
Board Member Since: 2007
Contact:
Contact Steve Jelf

Re: Spring shackles

Post by Steve Jelf » Mon May 13, 2019 9:12 pm

If you have the equipment or free access to it, fixing them yourself is worthwhile. If not, it's probably better to bite the financial bullet and pay the $150 for new ones.
The inevitable often happens.
1915 Runabout
1923 Touring
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”