Hello guys,
Picked this up from a friend yesterday. Not labeled, and I've spent hours comparing it to others. Not sure if I'll actually run it but it's interesting to me. No rotor, distributor cap I have with it looks a lot like a early 20s Delco type. Anyone recognize it?
Distributor conversion identification?
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
DylanWills
Topic author - Posts: 7
- Joined: Tue Oct 08, 2019 2:07 pm
- First Name: Dylan
- Last Name: Wills
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring (project)
- Location: Lake Stevens, WA
Distributor conversion identification?
- Attachments
-
-
TRDxB2
- Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Distributor conversion identification?
Loos like what was called an "Timer Elevator". Basically a standard commutator would sit on top for easy adjusting, Need to see what is on the plate where points would go. I see that it has a condenser. May be a modification of sorts
- Attachments
-
- 795478.jpg (91.4 KiB) Viewed 1169 times
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
JTT3
- Posts: 1855
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
Re: Distributor conversion identification?
Can you take a picture from the top angle
-
DylanWills
Topic author - Posts: 7
- Joined: Tue Oct 08, 2019 2:07 pm
- First Name: Dylan
- Last Name: Wills
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring (project)
- Location: Lake Stevens, WA
Re: Distributor conversion identification?
Yep I can get a picture when I get home. Don't think it's a timer elevator, that's what I initially thought too. Only modification I can see is the modern condenser. Inside distributor has point "cam" points and provision for rotor. Also has clips to hold cap in place, and indexing point to clock cap in correct location. All looks original to the assembly.
-
TRDxB2
- Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Distributor conversion identification?
Enhanced the original photo
- Attachments
-
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
DylanWills
Topic author - Posts: 7
- Joined: Tue Oct 08, 2019 2:07 pm
- First Name: Dylan
- Last Name: Wills
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring (project)
- Location: Lake Stevens, WA
Re: Distributor conversion identification?
Here's a couple of the top. Thanks for enhancing that picture, way better!
- Attachments
-
-
-
TRDxB2
- Posts: 6260
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedsters (1919 w 1926 upgrades), 1926 (Ricardo Head)
- Location: Moline IL
- Board Member Since: 2018
Re: Distributor conversion identification?
Very Interesting. Clean it up you might find something to help ID
- Attachments
-
- IMG_20230716_132830.jpg (101.96 KiB) Viewed 1073 times
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
Henry K. Lee
- Posts: 5474
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Life Member: YES
Re: Distributor conversion identification?
Looks like a Tornado brand.
Hank
Hank
-
tselliott
- Posts: 329
- Joined: Mon Jan 14, 2019 11:28 am
- First Name: Scott
- Last Name: Elliott
- * REQUIRED* Type and Year of Model Ts owned: 1923 Mercury speedster replica, 1923 speedster
- Location: Tigard, OR
Re: Distributor conversion identification?
I can not tell you what brand it is but I have a couple of those distributor housings. When I bought my speedster it had one of those on it (still does). The one in my speedster had been adapted to run an old Datsun distributor head on it. I have converted the points to a pertronix unit.
The gears in those distributors are a little different. They look more like a spider gear in a rear end than they do the Bosch gears. I pick up another at a swap meet just for the housing and gears just in case anything happened to mine.
The problem with those old distributors is finding the cap and rotor, that’s probably why mine had been converted.
I have since converted a Bosch distributor housing to run a Nissan distributor head, works great.
The gears in those distributors are a little different. They look more like a spider gear in a rear end than they do the Bosch gears. I pick up another at a swap meet just for the housing and gears just in case anything happened to mine.
The problem with those old distributors is finding the cap and rotor, that’s probably why mine had been converted.
I have since converted a Bosch distributor housing to run a Nissan distributor head, works great.
-
DylanWills
Topic author - Posts: 7
- Joined: Tue Oct 08, 2019 2:07 pm
- First Name: Dylan
- Last Name: Wills
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring (project)
- Location: Lake Stevens, WA
Re: Distributor conversion identification?
Thanks for the input guys. I compared it to a tornado brand, similar but not the same. Better casting that's for sure than the Tornado. Yeah the gears are a little odd compared to other distributors. The cap on this one looks almost identical to a '22 Chevy cap. Going to order a rotor for one of those as well and see if it works in this one.