Where did all that lint come from???

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Dan Hatch
Posts: 5009
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Where did all that lint come from???

Post by Dan Hatch » Sat Jun 22, 2024 2:24 pm

IMG_3764.jpeg
Has to come out.
Last edited by Dan Hatch on Sun Jun 23, 2024 4:04 am, edited 1 time in total.


Moxie26
Posts: 1863
Joined: Sun Jan 06, 2019 8:20 pm
First Name: Robert
Last Name: Jablonski
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: New Jersey
MTFCA Life Member: YES
Board Member Since: 1999

Re: Where did all that link come from???

Post by Moxie26 » Sat Jun 22, 2024 4:14 pm

Could it be that obvious? Low-speed drum is cracked right across and possibility of water in the oil

User avatar

JTT3
Posts: 1855
Joined: Sun Jan 06, 2019 11:57 am
First Name: John
Last Name: Tannehill
Location: Hot Coffee, MS

Re: Where did all that link come from???

Post by JTT3 » Sat Jun 22, 2024 9:16 pm

Dan would JB WELD WORK? Hehe


Topic author
Dan Hatch
Posts: 5009
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Where did all that link come from???

Post by Dan Hatch » Sun Jun 23, 2024 12:40 am

Back in the day old timers would just use a little modified bituminous roofing tar.


Wayne Sheldon
Posts: 4249
Joined: Sun Jan 06, 2019 3:13 pm
First Name: Wayne
Last Name: Sheldon
* REQUIRED* Type and Year of Model Ts owned: 1915 Runabout 1913 Speedster
Location: Grass Valley California, USA
Board Member Since: 2005

Re: Where did all that link come from???

Post by Wayne Sheldon » Sun Jun 23, 2024 3:43 am

That's better. But that drum sure isn't.

Just funnin' ya a bit.
Last edited by Wayne Sheldon on Sun Jun 23, 2024 6:12 am, edited 1 time in total.


Topic author
Dan Hatch
Posts: 5009
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Where did all that lint come from???

Post by Dan Hatch » Sun Jun 23, 2024 4:06 am

Guess I should check closer before I hit submit.


Allan
Posts: 6609
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Where did all that lint come from???

Post by Allan » Sun Jun 23, 2024 5:28 am

I don't know about JBWeld or tar, but I have a low speed drum taken from a working transmission that has had such a crack brazed up. I guess you do what you have to at the time.

Allan from down under


Wayne Sheldon
Posts: 4249
Joined: Sun Jan 06, 2019 3:13 pm
First Name: Wayne
Last Name: Sheldon
* REQUIRED* Type and Year of Model Ts owned: 1915 Runabout 1913 Speedster
Location: Grass Valley California, USA
Board Member Since: 2005

Re: Where did all that lint come from???

Post by Wayne Sheldon » Sun Jun 23, 2024 6:25 am

Allan,
A long time ago, I bought a big box full of model T transmission parts. Most of the parts were pretty good, some really nice pieces. However, also in the box were two drums that had been cracked across that way, and very nicely brazed and finished up. Over the years, I have used most of the pieces from that box. But I think I still have both of those two drums. I have threatened to use them a few times. I still might for some sort of short use spare engine or something? I just have never been able to bring myself to put them into a running engine. Not even a short use spare engine.
Part of me wants to try them. Part of me wants nothing to do with them in an engine, risking a major failure in the wrong time and place.


Jerry VanOoteghem
Posts: 4082
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan

Re: Where did all that link come from???

Post by Jerry VanOoteghem » Sun Jun 23, 2024 7:34 am

Dan Hatch wrote:
Sun Jun 23, 2024 12:40 am
Back in the day old timers would just use a little modified bituminous roofing tar.
I love it. Thanks for that! A forum tradition.

User avatar

JTT3
Posts: 1855
Joined: Sun Jan 06, 2019 11:57 am
First Name: John
Last Name: Tannehill
Location: Hot Coffee, MS

Re: Where did all that lint come from???

Post by JTT3 » Sun Jun 23, 2024 8:09 am

As most know Hugh Jass was a visionary with his use & promotion of modified Bitumen roofing tar. Perhaps the foremost advocate of its use in unexpected areas of model T restoration & maintenance. That was back in the day when we could have a little fun on the forum without getting to many upset. Best John
Last edited by JTT3 on Sun Jun 23, 2024 10:17 am, edited 1 time in total.


Topic author
Dan Hatch
Posts: 5009
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama

Re: Where did all that lint come from???

Post by Dan Hatch » Sun Jun 23, 2024 8:13 am

He was the master of T repair. We need more of his insight on how a T should be repaired.
All the new guys don’t know what they missed.


TXGOAT2
Posts: 7391
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
Board Member Since: 2021

Re: Where did all that lint come from???

Post by TXGOAT2 » Sun Jun 23, 2024 8:34 am

A basic course in the proper use of haywire is a good starting point. Having acquired a solid grounding in the use of haywire, the student can advance to studies in the uses of friction tape, assorted adhesive substances, shims and their uses, and the proper use of kerosene, oatmeal, and Marvel Mystery Oil.


Jerry VanOoteghem
Posts: 4082
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan

Re: Where did all that lint come from???

Post by Jerry VanOoteghem » Sun Jun 23, 2024 8:59 am

TXGOAT2 wrote:
Sun Jun 23, 2024 8:34 am
A basic course in the proper use of haywire is a good starting point. Having acquired a solid grounding in the use of haywire, the student can advance to studies in the uses of friction tape, assorted adhesive substances, shims and their uses, and the proper use of kerosene, oatmeal, and Marvel Mystery Oil.
You just can't find good quality haywire anymore. :(

User avatar

DanTreace
Posts: 3812
Joined: Sun Jan 06, 2019 10:56 am
First Name: Dan
Last Name: Treace
* REQUIRED* Type and Year of Model Ts owned: ‘12 open express,'23 cutoff, '27 touring
Location: North Central FL
Board Member Since: 2000
Contact:

Re: Where did all that lint come from???

Post by DanTreace » Sun Jun 23, 2024 9:04 am

JTT3 wrote:
Sun Jun 23, 2024 8:09 am
As most know Hugh Jass was a visionary with his use & promotion of modified bituminous roofing tar. Perhaps the foremost advocate of its use in unexpected areas of model T restoration & maintenance.

Agree wholeheartedly about Mr. Jass. His knowledge on that material led me to find it the very best sealant to keep those stubborn bubbles from escaping around the spark plugs. Excellent method for this purpose.



Mod roofing tar.jpg
Mod roofing tar.jpg (49.47 KiB) Viewed 2115 times
Last edited by DanTreace on Sun Jun 23, 2024 9:07 am, edited 2 times in total.
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford

User avatar

TWrenn
Posts: 3743
Joined: Sun Jan 06, 2019 10:53 am
First Name: Tim
Last Name: Wrenn
* REQUIRED* Type and Year of Model Ts owned: '13 Touring, '26 "Overlap" Fordor
Location: Ohio
Board Member Since: 2019

Re: Where did all that link come from???

Post by TWrenn » Sun Jun 23, 2024 9:05 am

Jerry VanOoteghem wrote:
Sun Jun 23, 2024 7:34 am
Dan Hatch wrote:
Sun Jun 23, 2024 12:40 am
Back in the day old timers would just use a little modified bituminous roofing tar.
I love it. Thanks for that! A forum tradition.
I like the spelling of it!! :lol: Lets take it one step further and spell it "BITCHumen"!! Cause back in the day it was used on a 95 degree day the installers WERE bitching!! :lol:


jiminbartow
Posts: 2433
Joined: Sun Jan 06, 2019 10:55 pm
First Name: James
Last Name: Patrick
* REQUIRED* Type and Year of Model Ts owned: 1926 Coupe
Location: Bartow, FL
Board Member Since: 2001

Re: Where did all that lint come from???

Post by jiminbartow » Sun Jun 23, 2024 10:02 am

I’ll bet there are some newbies on here trying to figure out who Hugh Jass was and how bituminous roofing tar is used to repair a Model T. You guys make the joke sound convincing. LOL! :lol:

User avatar

JTT3
Posts: 1855
Joined: Sun Jan 06, 2019 11:57 am
First Name: John
Last Name: Tannehill
Location: Hot Coffee, MS

Re: Where did all that lint come from???

Post by JTT3 » Sun Jun 23, 2024 10:12 am

And well it should Jim. How could you deny the flexibility & documentation of successful application of Bitumen roofing tar in those tough to fix problems. Personal testimonials confirm that flexibility and the fact that a world renowned Law firm (Duey, Cheatum & Howe) has confirmed those results. Hugh Jass’s reputation alone should repudiate any disparaging remarks of said remarkable use & results. Leaking rear pumpkin, Butimen roofing tar, hole in the block, Butimen roofing tar, leaking spark plug Butimen roofing tar, cracks on the tire or threads showing Butimen roofing, bare wires on your harness yes Butimen roofing tar. Awesome for all those applications and so many more. Keep a can of Butimen roofing tar on the exhaust so it’s ready to use when a problem erupts.


Norman Kling
Posts: 4634
Joined: Tue Jan 08, 2019 1:39 pm
First Name: Norman
Last Name: Kling
Location: Alpine California

Re: Where did all that lint come from???

Post by Norman Kling » Sun Jun 23, 2024 10:33 am

I recommend that you take the transmission out and either rebuild it or put in a different one which is in good condition. I will attach a picture of what happened to one of mine when I had a cracked drum. It locked up and I couldn't even push it in the middle of an intersection. Had to put a floor jack under one rear wheel to winch it up onto a trailer.
Norm
3 piece drum 2.jpg


DHort
Posts: 2826
Joined: Sun Jan 06, 2019 1:30 pm
First Name: Dave
Last Name: Hjortnaes
* REQUIRED* Type and Year of Model Ts owned: 24 Speedster, 20 touring
Location: Men Falls, WI

Re: Where did all that lint come from???

Post by DHort » Sun Jun 23, 2024 10:34 pm

Dave Nolting can solve that problem in no time.

Tell him you want one of those drums that was manufactured by Brian.

Post Reply Previous topicNext topic