WANTED, 1909/10 Fine thread drag link & tie rod or end parts to assemble

Post parts wanted or for sale here
User avatar

Topic author
JTT3
Posts: 1865
Joined: Sun Jan 06, 2019 11:57 am
First Name: John
Last Name: Tannehill
Location: Hot Coffee, MS

WANTED, 1909/10 Fine thread drag link & tie rod or end parts to assemble

Post by JTT3 » Sat Aug 16, 2025 10:09 am

Header says it all. Best John


RGould1910
Posts: 1142
Joined: Tue Jan 22, 2019 8:16 am
First Name: Richard
Last Name: Gould
* REQUIRED* Type and Year of Model Ts owned: 1910 touring, 1912 roadster , 1927 roadster
Location: Folsom, CA

Re: WANTED, 1909/10 Fine thread drag link & tie rod or end parts to assemble

Post by RGould1910 » Sat Aug 16, 2025 10:42 am

John, I wonder if you might make one as I did from a 13-14 riveted drag link. Cut off the ends, drill and ream them out, then tap them for the threaded rod. The rod is the easiest part to make.

I found the difficult part was tapping the threads straight but it was all doable.

User avatar

Topic author
JTT3
Posts: 1865
Joined: Sun Jan 06, 2019 11:57 am
First Name: John
Last Name: Tannehill
Location: Hot Coffee, MS

Re: WANTED, 1909/10 Fine thread drag link & tie rod or end parts to assemble

Post by JTT3 » Sat Aug 16, 2025 11:43 pm

Richard it may come to that. Thanks for the potential solve.
Best John


Ken Buhler
Posts: 525
Joined: Mon Jan 21, 2019 4:14 pm
First Name: Ken
Last Name: Buhler
* REQUIRED* Type and Year of Model Ts owned: 1927 Roadster 1927 Coupe
Location: Kelowna B.C.
Board Member Since: 2012

Re: WANTED, 1909/10 Fine thread drag link & tie rod or end parts to assemble

Post by Ken Buhler » Sat Aug 16, 2025 11:58 pm

I may have some of those if they have threads at both ends.
Work honestly
Stay true to your word
Get the job done right

Post Reply Previous topicNext topic