oil temperature
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 145
- Joined: Wed Jan 22, 2020 4:34 pm
- First Name: David
- Last Name: Kahle
- * REQUIRED* Type and Year of Model Ts owned: '26 coupe, '26 touring, ‘14 Staude tractor conversion, '27 coupe, '19 roadster, ’15 speedster, '14 touring
- Location: Leeper, Pa.
oil temperature
Does anyone know what the maximum oil temperature might be anticipated for a Model T? I'm still playing with rare earth magneto parts and 300 degrees F. seems to be the threshold temp. for neodymium.
-
- Posts: 572
- Joined: Mon Sep 14, 2020 10:57 pm
- First Name: Jeffrey
- Last Name: Hausey
- * REQUIRED* Type and Year of Model Ts owned: Early 23 Touring
- Location: Anaheim, Ca.
- Board Member Since: 2020
Re: oil temperature
If it gets above 230*f I would be greatly surprised.
-
- Posts: 4918
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: oil temperature
What you are doing has been done. Search in past posts.
-
Topic author - Posts: 145
- Joined: Wed Jan 22, 2020 4:34 pm
- First Name: David
- Last Name: Kahle
- * REQUIRED* Type and Year of Model Ts owned: '26 coupe, '26 touring, ‘14 Staude tractor conversion, '27 coupe, '19 roadster, ’15 speedster, '14 touring
- Location: Leeper, Pa.
Re: oil temperature
I have been fiddling with this for a few years and have made some very successful prototypes. They simply replace the original magnets with aluminum/rare earth pieces which lighten the flywheel about eight pounds and increase voltage by 30 to 40 percent with a mag gap of nearly 1/8 inch. Originally used samarium cobalt magnets which have a maximum operating temperature in excess of 550 degrees f. But are costly. High temperature neodymium magnets are far cheaper but have an operating threshold of just above 300 degrees.