F/S 16-20 fan
-
Craig Leach
Topic author - Posts: 1995
- Joined: Tue Jan 08, 2019 12:22 am
- First Name: craig
- Last Name: leach
- * REQUIRED* Type and Year of Model Ts owned: 1919 Firetruck/1922 Speedster
- Location: Laveen Az
F/S 16-20 fan
16-20 steel fan hub, good barrel for belt tight rivets, bushings a little loose but serviceable. $55 + shipping.
Craig.
Last edited by Craig Leach on Tue Nov 04, 2025 11:42 am, edited 3 times in total.
-
Karl Von Neumann
- Posts: 748
- Joined: Thu Jan 06, 2022 10:52 am
- First Name: Karl
- Last Name: VonNeumann
- * REQUIRED* Type and Year of Model Ts owned: 1916 touring 1927 tudor 1926 hotrod 1913 speedster (project) 1926 coupe (project)
- Location: Pleasant prairie Wisconsin
- Board Member Since: 2022
Re: F/S 09-16 fan
Fan hub for 09 to 16 was brass steel is 16 and on
Please hold the other 6 voices are taking a vote
-
Craig Leach
Topic author - Posts: 1995
- Joined: Tue Jan 08, 2019 12:22 am
- First Name: craig
- Last Name: leach
- * REQUIRED* Type and Year of Model Ts owned: 1919 Firetruck/1922 Speedster
- Location: Laveen Az
Re: F/S 16-20 fan
You are correct Karl I just looked @ the blades in the parts books. Thanks for the correction.
Craig.
Craig.
-
Allan
- Posts: 6970
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: F/S 16-20 fan
Those fan blades differ from our Canadian sourced parts. On ours, the outer end of the embossed ridge tapers out to almost nothing. Those are quite definitely sharply defined at each end, more like the deeper pressings on the very early blades. Interesting! Nice example.
Allan from down under.
Allan from down under.